<div dir="ltr"><div dir="ltr"><div dir="ltr"><div><br>Notes from PSWS / TangerineSDR call of 08-05-2019</div><div><br></div><div>1. MEC connector. <18:40:52> "Scotty WA2DFI W10": <a href="https://www.samtec.com/products/mec5-ra">https://www.samtec.com/products/mec5-ra</a><br>140 pins, fits in 50mm width. Need to include EEPROM ident<br>on the RF module so the FPGA knows what it is talking to.</div><div><br></div><div>2. Plan on one Specification and one ICD per RF module. 6 RF modules currently defined, so 6 Specs and 6 ICDs.</div><div><br></div><div>3. One Spec and one ICD for the Data Engine outlining the programmable aspects of the RF interface.</div><div><br></div><div>4. Request that we keep folks on the list up to date on the information flow as opposed to individual emails.  But<br>don't flood the list either.</div><div><br></div><div>5. Dave W. working on Magnetometer and extenders. Will report progress on future call. </div><div><br></div><div>6. Should we create / post videos or other showing what we are doing on this project, what the project is, or what it does?<br>  </div><div>-- Tom, N5EG</div><div><br></div><div><br></div></div></div></div>