<div dir="ltr">There was some speculation about storage interfaces available on the Odroid N2 on last night's Teamspeak session.<div><br></div><div>For those who are interested, some information is available:</div><div><br></div><div>The N2 does <b>not</b> have an M.2 interface to directly support NVME Solid State Drives (SSDs).  </div><div><br></div><div>It appears that currently available CPUs available from AM Logic (AML) currently only present 1 lane of PCIe 2.0 for use by board designers.  This is most frequently committed to supporting USB 3.0.  (or perhaps 2, with one used to support 1Gb Ethernet)</div><div><br></div><div>A simple graphic benchmark of USB write speed is shown under the heading "USB 3.0 hosts":</div><div><a href="https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram/">https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram/</a> , which shows write speeds varying dramatically with block size.,<br></div><div><br></div><div>Further down the page are tables of "eMMC storage performance"  and "Micro-SD UHS performance".</div><div><br></div><div>It seems that the fastest write performance available in this environment (other than using an inherently size-limited RAM disk) is:</div><div><ol><li>to use a USB 3.0 connected external device that either converts to an M.2 NVME interface supporting a NVME SSD, </li><li>or a USB 3.0 device to emulate SATA to support a spinning disk.</li></ol></div>Other boards in this price range support other options.  The two most visible options I have found are:<div><ol><li>Boards using the <span style="color:rgb(76,81,84);font-family:"Libre Franklin",sans-serif;font-size:14px">Rockchip’s RK3399 processor, which is arguably slower (2 big + 4 little cores) but which supports 4 PCIe lanes + native support for 1Gb Ethernet and USB 3.0 simultaneously.  THis is available from several board suppliers, and most configurations support M.2 NVME.  eg.: </span><a href="https://www.khadas.com/product-page/edge-v">https://www.khadas.com/product-page/edge-v</a></li><li><span style="color:rgb(76,81,84);font-family:"Libre Franklin",sans-serif;font-size:14px">The NVIDIA Nano module, which supports almost all desired interfaces in spades, but again is supported by a less potent quad-core A57 supported by the </span>128-core Maxwell™ GPU.  Only M.2 Key E is available on the developer kit which is not usually used to support storage devices.  But everything is available on the module edge connector,an all desired interfaces can be used simultaneously. eg: <a href="https://developer.nvidia.com/embedded/dlc/jetson-nano-product-design-guide">https://developer.nvidia.com/embedded/dlc/jetson-nano-product-design-guide</a></li></ol><div>Dave, KD0EAG</div><div><br></div><span style="color:rgb(76,81,84);font-family:"Libre Franklin",sans-serif;font-size:14px"></span></div></div>