<div dir="ltr">I have JNOS 2.0p running on a Pi and BPQ running on a Windows computer. My JNOS compile bypasses the bbs permissions. I have a vhf port, hf port and a couple of axudp ports to other packet nodes.<div><br></div><div>I have a connect command from the JNOS to the BPQ computer.<div>attach axudp bpq 192.168.1.49 10093 10093 n0mr-7</div><div>N0MR-7 is the node call on BPQ and not used in JNOS.</div><div><br></div><div> I can connect to the bpq node or bbs fine but no one else can connect. It acts like I as sysop have the only permission for this connection.</div><div><br></div><div>Am I using the correct attach command?</div><div>Is the flags number in the ifconfig listing connected to permissions and what determines the flag number?</div><div>Anything else that I&#39;m missing?</div></div><div>Is there a better method for this attach/connect?</div><div><br></div><div>I do have a map connection from bpq to JNOS that works fine.</div><div><br></div><div>Jerry, N0MR</div></div>