<div dir="auto">I checked the file and yes it is as you’ve written, no # at the beginning of the line to ensure forwarding is turned on.</div><div dir="auto">Do you think if I changed the ip addresses for tun0 were changed to</div><div dir="auto">10.0.0.197 and 10.0.0.198 that it would make a difference or maybe DMZ the pi instead of tun0?<br clear="all"><div dir="auto"><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature">Regards,<br>Don </div></div></div><div><br></div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Oct 12, 2023 at 3:28 PM Boudewijn (Bob) Tenty <<a href="mailto:bob@tenty.ca">bob@tenty.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><u></u>

  
    
  
  <div>
    I don't believe is your cable modem and as you said there is no
    other firmware available for it. I believe VE3CLG has the<br>
    same modem and he has no problem with it.  Do you have
    net.ipv4.ip_forward=1  enabled in /etc/sysctl.conf of your PI?<br>
    <p>73,</p>
    <p>Bob VE3TOK<br>
    </p></div><div>
    <div>On 2023-10-12 14:35, Don Moore wrote:<br>
    </div>
    <blockquote type="cite">
      
      <div dir="auto">I was thinking that I am DMZ the jnos side of
        tun0….150. Is it or could it be something as simple as DMZ the
        pi side….149<br clear="all">
        <div>
          <div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><br>
          </div>
        </div>
      </div>
      <div><br>
      </div>
      <div><br>
        <div class="gmail_quote">
          <div dir="ltr" class="gmail_attr">On Thu, Oct 12, 2023 at
            2:17 PM Don Moore <<a href="mailto:ve3zda@gmail.com" target="_blank">ve3zda@gmail.com</a>>
            wrote:<br>
          </div>
          <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
            <div dir="auto">Hey Bob</div>
            <div dir="auto">It’s a rogers ignite modem and I don’t think
              they offer different firmware for it. I use wired from the
              modem to jnos.</div>
            <div dir="auto">This may or may not have something to do
              with it.</div>
            <div dir="auto">The pi address is 10.0.0.196 and tun0 has
              ….149 to …150</div>
            <div dir="auto">The modem allows DMZ to tun0 ….150 but tcp
              forward is  to ….196.</div>
            <div dir="auto">There is no option to forward directly to
              …..150</div>
            <div dir="auto">If that’s the case is there a command in the
              the pi that’s required to enable port forwarding to/from
              tun0</div>
            <div dir="auto"><br clear="all">
              <div dir="auto">
                <div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature">73<br>
                  Don - ve3zda</div>
              </div>
            </div>
            <div><br>
            </div>
            <div><br>
              <div class="gmail_quote">
                <div dir="ltr" class="gmail_attr">On Thu, Oct 12, 2023
                  at 2:02 PM Boudewijn (Bob) Tenty <<a href="mailto:bob@tenty.ca" target="_blank">bob@tenty.ca</a>>
                  wrote:<br>
                </div>
                <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
                  <div>
                    <p>Don,</p>
                    It could be your consumer router. Those links from
                    you keep the incoming route open for those  ip
                    numbers <br>
                    for some time, that could be 5 or maybe 15 minutes
                    or so and in that time there is other traffic from
                    your station <br>
                    that resets those timers and keep it open, etc. The
                    best way to solve that is replacing the firmware
                    with WRT if  that <br>
                    is available for the chip-set in that router and if
                    it is your own and there is no setting to override
                    that.  I see that you <br>
                    have a cable connection, but I don't know or that
                    cable modem is the only consumer router you have in
                    line?  <br>
                    <p>73,</p>
                    <p>Bob VE3TOK<br>
                    </p>
                  </div>
                  <div>
                    <p><br>
                    </p>
                    <div>On 2023-10-12 13:06, Don Moore wrote:<br>
                    </div>
                    <blockquote type="cite">
                      <div dir="auto">I’m wondering if someone can tell
                        me what might be wrong.</div>
                      <div dir="auto">Telnet works perfectly to me via
                        any of my links but not from anyone else however
                        I can telnet to anyone.</div>
                      <div dir="auto">My station is set up using DMZ so
                        all traffic is getting to jnos tun0</div>
                      <div dir="auto"><br clear="all">
                        <div dir="auto">
                          <div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature">Regards,<br>
                            Don - ve3zda</div>
                        </div>
                      </div>
                      <br>
                      <fieldset></fieldset>
                      <pre>_______________________________________________
nos-bbs mailing list
<a href="mailto:nos-bbs@lists.tapr.org" target="_blank">nos-bbs@lists.tapr.org</a>
<a href="http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org" target="_blank">http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org</a>
</pre>
                    </blockquote>
                    <pre cols="0">-- 
There is nothing permanent except change
 
-Heraclitus</pre>
                  </div>
                </blockquote>
              </div>
            </div>
          </blockquote>
        </div>
      </div>
    </blockquote>
    <pre cols="0">-- 
There is nothing permanent except change
 
-Heraclitus</pre>
  </div>

_______________________________________________<br>
nos-bbs mailing list<br>
<a href="mailto:nos-bbs@lists.tapr.org" target="_blank">nos-bbs@lists.tapr.org</a><br>
<a href="http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org</a><br>
</blockquote></div></div>