<div dir="ltr">Dave,<div><br></div><div>  I don't have your exact hardware, so I can't comment on much except for the "vhf" errors.</div><div><br></div><div>  In the autoexec.nos, there needs to be an interface called "vhf" defined. You use the "attach" and "ifconfig" commands to do so:</div><div>attach asy ttyAMA0 - ax25 145.09 4096 256 19200</div><div>ifconfig 145,09 description "145.09 - 1200 baud port"</div><div><br></div><div>Check the attach command in your help directory (found in your jnos/help directory) for specifics. Same for ifconfig.</div><div><br></div><div>I wish I could help more, but that is as far as I can go without more info like the contents of the autoexec.nos file and other config stuff.</div><div><br></div><div>Cheers,</div><div><br></div><div>Jim N8AVX</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, May 7, 2023 at 2:11 PM David Lolling <<a href="mailto:dave.lolling@gmail.com">dave.lolling@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Hello,<div>I am a long time Ham and long time Linux/Unix user but just started playing with AX25/Aprs.  I have two small test packet stations setup consisting of a Raspberry Pi connected to a Baofeng UV-5R through a DigiRig interface.  Both systems have the AX25 stack installed as well as Direwolf.  I set up the test environment so I can learn about packet radio and eventually set up a BBS in our area as we currently do not have any packet services in our area.</div><div><br></div><div>I have JNOS version 2.0.o.2 installed on one of the Raspberry Pi's and it seems to be working OK. I am using the minimal autoexec.nos and am having problems getting the RF port up and running.<br></div><div><br></div><div>When I start up JNOS using the command ./jnos -d /jnos I get the following errors:</div><div><br></div><div>Can't lock /dev//tmp/kisstnc (/var/lock/LCK../tmkisstnc): No such file or directory<br>Interface "vhf" unknown<br>input line: ifconfig vhf description "vhf - 1200 baud port"<br>Interface "vhf" unknown<br>input line: param vhf 2 256<br>Interface "vhf" unknown<br>input line: param vhf 3 1<br>Interface "vhf" unknown<br>input line: param vhf 5 1<br>Interface "vhf" unknown<br>input line: param vhf TxDelay 25<br>Interface "vhf" unknown<br></div><div><br></div><div>I started Direwolf before starting JNOS and Direwolf reports the following:</div><div>Virtual KISS TNC is available on /dev/pts/2<br>Ready to accept AGW client application 0 on port 8000 ...<br>Ready to accept KISS TCP client application 0 on port 8001 ...<br>Created symlink /tmp/kisstnc -> /dev/pts/2<br></div><div><br></div><div>I am assuming I just have something misconfigured? </div><div>From past experiments, I have axports, ax25d.conf, ax25-node configured so I can connect to this node.  At the moment, I don't have any of that running, just Direwolf and JNOS running.</div><div><br></div><div>Can anyone point me in the right direction to get JNOS configured so I can connect using the RF port? Do I need to make any other configuration changes? Are there other commands I need to run and in what sequence?  </div><div><br></div><div>Any help would be appreciated.</div><div>73 - Dave</div><div>KD9GN</div><div><br></div><div><br></div></div>
_______________________________________________<br>
nos-bbs mailing list<br>
<a href="mailto:nos-bbs@lists.tapr.org" target="_blank">nos-bbs@lists.tapr.org</a><br>
<a href="http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org</a><br>
</blockquote></div>