<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19019">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>I configured JNOS almost as shown in the diagram:
JNOS is 192.168.1.201, the Linux end is 192.168.1.200, but the Linux box is
192.168.1.107 not 192.168.1.60 as shown in the diagram. </FONT></DIV>
<DIV><FONT size=2 face=Arial><FONT size=2 face=Arial>From the Linux box itself,
I can ping 192.168.1.200 and 192.168.201.</FONT></FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>However, I can't see JNOS from an XP computer on
the LAN. [Request timed out.] On the XP computer I enter: route add
192.168.1.201 192.168.1.107. Then</FONT><FONT size=2 face=Arial> I can
successfully ping 192.168.1.107 and 192.168.1.200, but NOT
192.168.1.201.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I am running SuSe Linux. The rollowing lines from
autoexec.nos might be relevant:</FONT></DIV>
<BLOCKQUOTE style="MARGIN-RIGHT: 0px" dir=ltr>
<DIV><FONT size=2 face=Arial>shell ifconfig tun0 192.168.1.200 pointopoint
192.168.1.201 mtu 1500 up<BR>pause 3<BR><BR># Enable IP forwarding<BR>shell
echo 1 >/proc/sys/net/ipv4/ip_forward<BR>shell iptables -t nat -A
POSTROUTING -o eth0 -s 192.168.1.107 -j MASQUERADE</FONT><FONT size=2
face=Arial></DIV></BLOCKQUOTE>
<DIV>
<DIV><FONT size=2 face=Arial>How do I make JNOS accessible from the
LAN?</FONT></DIV></DIV>
<DIV><BR></DIV></FONT>
<DIV><FONT size=2 face=Arial>73 de Jay K0OLK</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV></BODY></HTML>