<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
AP... tocall is used as a group ID to make aprs packets <br>
recognizable on shared channels.<br>
Most aprs software filter out non aprs packets.<br>
>From it you can see what software they are using and the software
release.<br>
Z = experimental.<br>
<br>
See <a href="http://www.aprs.org/tocalls.txt">http://www.aprs.org/tocalls.txt</a><br>
<br>
At most WIDE2-2 is used to limit the hops to two (VHF)<br>
<br>
<br>
See the New-N Paradigm<br>
<br>
<a href="http://www.aprs.org/fix14439.html">http://www.aprs.org/fix14439.html</a><br>
<br>
<br>
at HF: GATE & WIDE2-1<br>
<br>
see <br>
<br>
<a href="http://info.aprs.net/index.php?title=Paths">http://info.aprs.net/index.php?title=Paths</a><br>
<br>
<br>
<br>
73,<br>
<br>
Bob VE3TOK<br>
<br>
Hal wrote:
<blockquote id="mid_20090814190444_GA2045_lnx2"
cite="mid:20090814190444.GA2045@lnx2" type="cite">
<pre wrap="">On 08-13, Bob Tenty wrote:
</pre>
<blockquote id="StationeryCiteGenerated_1" type="cite">
<pre wrap="">The aprs id is APZ200 in jnos (2.0f) so you should use something like..
ax25 route add APZ200 ax0 WIDE1-1
or
ax25 route add APZ200 ax0 WIDE2-2
</pre>
</blockquote>
<pre wrap=""><!---->
Greetings: I noted when entering APRS via ECHO in the ax25
route add that the machine transmits APZ200 only.. No APRS /or/ ECHO..
I'll keep trying to figure this out.. I'm having a problem with the APRS
command docs.. Maybe I'm too slow, eh??
What is APZ200?? An ID but what happens to it when copied by
other stations.. Is that a duh query?? HI.. I'm still not sure where
ECHO fits into the equasion too..
</pre>
</blockquote>
<br>
</body>
</html>