<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
  <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
  <META NAME="GENERATOR" CONTENT="GtkHTML/3.10.1">
</HEAD>
<BODY>
Something is amiss.<BR>
Maybe my understanding...<BR>
<BR>
Using the BBS feature includes the "Upload" and "Download" commands.<BR>
The documentation says "transfer an ASCII file" and "Download and store".<BR>
But I do not find a file to be transferred from the process.<BR>
I do find the file to either originate from the terminal, or be displayed on the terminal.<BR>
The "terminal" seems like the wrong "device" to me...<BR>
<BR>
Here is my expectation established by the documentation:<BR>
If there is an "X" file on the remote node, a "D" command should deposit a new "X" file on my node.<BR>
If there is an "X" file on my node, a "U" command should deposit a new "X" file on the remote node.<BR>
Permissions are honored.<BR>
Over-write happens after a message is responded to with a "Yes".<BR>
The "What" command shows all defaults in effect.<BR>
<BR>
OK - the command would be more generic if it were more like the "copy" command including both the source and destination file names.<BR>
But as long as a same-name-only transfer is OK, then the command is usable...<BR>
<BR>
Thus if I "what" my system before connecting and find a "X" file, then after connecting and "U X" is complete the "X" file should be copied to the remote node and be shown by a "what" on that node.<BR>
<BR>
But jnos2.0d does not - what does happen is that the file contents are displayed as session text on the terminal.<BR>
The "D" command lists the contents of the remote file on the terminal.<BR>
The "U" command expect the destination file content to be entered at the terminal by the user in real time.<BR>
<BR>
So - tell me what is going on?<BR>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<BR>
73<BR>
de Skip k8rra k<BR>
<BR>
<BR>
</TD>
</TR>
</TABLE>
</BODY>
</HTML>