[nos-bbs] Working config file

[Jay]

yGreetings,
    I still have a JNOS support webpage up on the Michigan Digital Radio 
Group webpage, at:

        http://www.mi-drg.org/jnos

    A SAMPLE autoexec.nos config file can be found at:

        http://www.mi-drg.org/AUTOEXEC.NOS

        Just read through it and follow the directions whether you will be 
running a stand-alone home station, or will be running a "Hamgate" or a 
default route for your community that runs a current copy of the ENCAP 
routing table.  Be carefull, it uses the callsign W1AW as the default. 
You'll need to be careful to set ALL the values for your station :)


    Hope this helps you to get your node configured.

       --- Jay Nugent  WB8TKL
           o Past ARRL Assistant Section Manager
             for Digital Technologies



   On Tue, 3 Sep 2024, Anton Laukhin (RC3C) wrote:

> Hi guys.
>  
> Could anyone send me working JNOS config in private mail, please.
> Thanks.
>  
> ---
> 73! Kind regards,
>   De Anton RC3C & RY3AAL (ex.RV3DHC), RK5A002SWL (SWL) ::: New Moscow, Troitsk, KO85PL
>   EchoLink system #2102, EchoLink.RU portal, *RUSSIA* conf server #196189
>   DMR #2503041 :: D-STAR XLX937 :: YSF TG25001 :: 4U1Aᵀᴹ :: RC5Cᵀᴹ
>   CB-Radio: 50RDX003 own / 50RDX000 club / 50RC107 own
>   Alias: Red Cable 3rd Category
>   Rutube :: Blog Vkontakte :: Discord :: Telegram 
> _________
> Sent from WebMail.Yandex @ home
>  
> 
>
-------------- next part --------------
_______________________________________________
nos-bbs mailing list
nos-bbs at lists.tapr.org
http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org