[nos-bbs] agwpe.c (direwolf) now supports additional kiss port(s)

[John Kristian]

It seems Maiko is referring to the changes.txt file in the development 
version. So, I suppose this isn't supported in the official version.

Is this an effective way to configure three AGW ports?

attach agwpe direwolf 192.168.1.10 8000
attach kiss radioA 0 direwolf
attach kiss radioB 2 direwolf
attach kiss radioC 3 direwolf

In this example, I suppose Direwolf provides four AGW ports, at offsets 
0, 1, 2, 3 in the list of ports that it sends to AGW clients.

Best regards,
John Kristian W6JMK

On 1/27/2024 2:32 PM, Maiko wrote:
> you said direwolf, no ? AGWPE is the define, not WINRPR, section 10) 
> in release history
>
> On January 27, 2024 4:00:12 p.m. CST, John Kristian wrote:
>
>     I see in the release history
>     <https://www.langelaar.net/projects/jnos2/documents/changes.txt>:
>
>     Note the following new possibilities for your config.h file :
>      #define WINRPR /* kiss over tcp/ip interface to WinRPR */
>     ...
>
>     But not much else. Should I read the source code for references to
>     WINRPR, and deduce how to configure it? An example or
>     documentation would be helpful.
>
>     On 1/27/2024 6:27 AM, Maiko wrote:
>>     im on the road right now, but there should be something in the
>>     release history.
>>     Maiko / ve4klm
>>
>>     On January 27, 2024 5:28:40 a.m. CST, John Kristian wrote:
>>
>>         How would I configure JNOS to communicate via TCP/IP to three
>>         KISS ports (e.g. in Direwolf)? Please point me to the
>>         documentation (if any). Does the official version of JNOS
>>         support this?
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20240127/e6e95a89/attachment.html>