[nos-bbs] Help with getting minimal JNOS configuration working

[Maiko (Personal)]

Direwolf is a software modem, you should be using agwpe driver.

Read this document, jump to section 5.6

    https://www.langelaar.net/jnos2/documents/j2addendum.txt

It's a TCP/IP connection, direwolf is the one talking to the
TNC, not JNOS, so you can't use attach asy type commands.

Maiko

>     Virtual KISS TNC is available on /dev/pts/2
>     Ready to accept AGW client application 0 on port 8000 ...
>     Ready to accept KISS TCP client application 0 on port 8001 ...
>     Created symlink /tmp/kisstnc -> /dev/pts/2