[nos-bbs] JNOS HF port using direwolf

[K3CHB]

Hello NOS experts.

What are is the ideal configuration for using direwolf as an 
HF port in JNOS?
 
This is what i got in my direwolf.conf
FIX_BITS 1 AX25
FRACK 15     
PACLEN 80
MAXFRAME 1
EMAXFRAME 16

And, this is what I am using for a config to bring up the port.

# ATTACH DEVICE
# [hf] (DIREWOLF)
# ---------------
pause 1
remark "Detach hf port if attached..."
detach hf
pause 2
remark "Attaching AGWPE device..."
# AGWPE CONNECTION TO DIREWOLF
# ----------------------------
attach agwpe hf 192.168.1.139 8001
#
# SOCAT SERIAL CONNECTION TO DIREWOLF
# ------------------------------------
# attach asy ptmx_direwolf - ax25 hf 4096 256 19200
remark "Setting up direwolf on port 'hf'"
ifconfig hf ax25 paclen 80
#ifconfig hf ax25 bctext "K3CHB-5::JNOS
2.0::BBS/CONV/NETROM/DX/AMPRNet::PENNSYLVANIA" ifconfig hf Description
"Net40 - 7.109.5 MHz (300 bps)" ifconfig hf ax25 maxframe 1
ifconfig hf ax25 irtt 15000
ifconfig hf ax25 timertype exponential
ifconfig hf ax25 t2 3000
ifconfig hf ax25 t4 10000
ifconfig hf ax25 window 256
ifconfig hf ax25 maxwait 20000
ifconfig hf tcp irtt 10000
ifconfig hf tcp window 256
ifconfig hf tcp mss 512
ifconfig hf tcp timertype exponential
arp eaves hf on
arp poll hf on
#arp add 44.56.50.5 ax25 qst-0 hf
#arp publish 44.56.50.5 ax25 k3chb-5 hf
ax25 bcport hf on
ax25 digi hf on
ax25 hport hf on
ip hport hf on
pause 2
ax25 bc hf 
trace hf 0311
mode hf vc
conv interface hf on
# route add 44.135.32.74 hf
#ax25 route add ID hf W4KUM
#ax25 route add MAIL hf W4KUM
remark "*** Direwolf attached."
pause 2

Is there a better way?

-- 
K3CHB

-Sent from claws-mail/linux