[nos-bbs] connect to BPQ

[Michael Fox - N6MEF]

I don't know since it's not my BPQ station.

How would I tell the BPQ sysop to check/set?

Michael


-----Original Message-----
From: nos-bbs <nos-bbs-bounces at lists.tapr.org> On Behalf Of Boudewijn (Bob) Tenty
Sent: Sunday, October 27, 2019 3:09 PM
To: nos-bbs at lists.tapr.org
Subject: Re: [nos-bbs] connect to BPQ

Is the jnos call set as a bbs in BPQ?

Bob

On 2019-10-27 17:38, Michael Fox - N6MEF wrote:
> Does anyone know the correct forward.bbs sequence for an AXUDP connection to
> a BPQ machine?
>
> For a machine named KD6MTU-1, I've got
>
> {callsign}
> ax25 {port} {callsign-ssid}
> {mailbox}
> {mailbox}
> {mailbox}
> ----
>
> What happens is I send the connect (SABM frame) and the remote machine
> replies with a UA frame.  Then we just sit there.  Eventually my machine
> times out and I send a DISC frame, and the BPQ machine replies with a UA
> frame.
>
> So, the AXUDP tunnel seems to be fine.  But evidently:
> 1)  I'm not sending something that tells the BPQ machine to give me a
> forwarding prompt, OR
> 2)  The BPQ machine needs to be set up somehow to know to give me a
> forwarding prompt
>
> Any ideas?
>
> Michael
>
>
>
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org

-- 

When you change the way you look at things, the things you look at change 

Max Planck


_______________________________________________
nos-bbs mailing list
nos-bbs at lists.tapr.org
http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org