[nos-bbs] JNOS prototype code for RMS node (correction)

[Boudewijn (Bob) Tenty]

Compiling jnos with tncall ends up with a linker problem, undefined reference to 'tnlstart' in config.o.

gcc -DUNIX -g3   -DDEBUG -Wall -o jnos main.o config.o version.o session.o \
    jheard.o clients.a servers.a hfdd.a net.a internet.a net.a netrom.a \
    unix.a ax25.a aprs.a dump.a ppp.a bootp.a inp.a j2curses.a \
    -lncurses  -lcrypto -lcrypt
config.o:(.data+0xf5c): undefined reference to `tnlstart'
ax25.a(ax25mail.o): In function `ax25start':
/srv/home-remote/hamradio/src/jnos2.0k/ax25mail.c:79: undefined reference to `tnlhandle'
collect2: error: ld returned 1 exit status
make: *** [jnos] Error 1

73,

Bob (Boudewijn) VE3TOK

On 2019-08-10 22:00, M Langelaar wrote:
> Some good fortune,
>
> Can send and receive now, it was a 'stupid' mistake I had made.
>
> Anyways, this is beta, have fun !
>   (ie, it's not going to be perfect, let me know how it goes)
>
> Maiko
>
> On 10/08/2019 6:19 p.m., M Langelaar wrote:
>> Check the official site for some beta code :
>>
>>    www.langelaar.net/jnos2        (release history)
>>
>> It's not complete, packet clients can only read messages from
>> the CMS at this time, sending messages is broken - they don't
>> get sent, need to still figure out why.
>>
>> But I wanted to get this out there for interested parties, since I
>> will not be able to work on this stuff for the next few weeks.
>>
>> You can at least demonstrate to people how to pick off messages
>> from the CMS using an actual winlink express packet setup.
>>
>> Maiko / VE4KLM
>>
>>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org

-- 

When you change the way you look at things, the things you look at change 

Max Planck