[nos-bbs] jnos2.0k compile for pi fails...

[Rick DuBrava]

Jerome --

Install == libssl-dev

That should clear the missing md5.h error

On Wed, Jul 27, 2016 at 5:06 PM, jerome schatten <romers at shaw.ca> wrote:

> On original pi model B running wheezy, which worked fine with 2.0j7.  A
> fresh compile after apt-get update; apt-get upgrade; make clean, produces:
>
> […]
> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o callval.o callval.c
> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o baycom.o baycom.c
> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o multipsk.o multipsk.c
> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o snmpd.o snmpd.c
> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o agwpe.o agwpe.c
> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o wlauth.o wlauth.c
> wlauth.c:31:25: fatal error: openssl/md5.h: No such file or directory
> compilation terminated.
> <builtin>: recipe for target 'wlauth.o' failed
> make: *** [wlauth.o] Error 1
> pi at raspberrypi ~/jnos/src/rsync $
>
>
> I notice that in wlauth.c  openssl/md5.h was hashed out so I unhashed it >
> make clean > make
> and it got a bit further and failed again with different errors.  I then
> noticed Maiko’s note about needing openssl-devel, so:
>
>
> pi at raspberrypi ~/jnos/src/rsync $ sudo apt-get install openssl-devel
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> E: Unable to locate package openssl-devel
>
> So, I’m stuck and would be grateful for any advice.
> Jerome - ve7ass
> Vancouver
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> http://www.tapr.org/mailman/listinfo/nos-bbs
>



-- 
Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20160727/53592fa3/attachment.html>