[nos-bbs] jnos2.0k compile for pi fails...

[jerome schatten]

Thank you!  That did it; the compile went fine with nary a warning
jerome ve7ass

> On Jul 27, 2016, at 15:28, Ron Gibson <ve3cgr at sympatico.ca> wrote:
> 
> Hi Jerome,
> 
> Try 'sudo apt-get install libssl-dev'
> 
> Ron
> 
> VE3CGR
> 
> 
> 
> On 7/27/2016 5:06 PM, jerome schatten wrote:
>> On original pi model B running wheezy, which worked fine with 2.0j7.  A fresh compile after apt-get update; apt-get upgrade; make clean, produces:
>> 
>> […]
>> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o callval.o callval.c
>> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o baycom.o baycom.c
>> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o multipsk.o multipsk.c
>> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o snmpd.o snmpd.c
>> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o agwpe.o agwpe.c
>> gcc -DUNIX -g3   -DDEBUG -Wall   -c -o wlauth.o wlauth.c
>> wlauth.c:31:25: fatal error: openssl/md5.h: No such file or directory
>> compilation terminated.
>> <builtin>: recipe for target 'wlauth.o' failed
>> make: *** [wlauth.o] Error 1
>> pi at raspberrypi ~/jnos/src/rsync $
>> 
>> 
>> I notice that in wlauth.c  openssl/md5.h was hashed out so I unhashed it > make clean > make
>> and it got a bit further and failed again with different errors.  I then noticed Maiko’s note about needing openssl-devel, so:
>> 
>> 
>> pi at raspberrypi ~/jnos/src/rsync $ sudo apt-get install openssl-devel
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> E: Unable to locate package openssl-devel
>> 
>> So, I’m stuck and would be grateful for any advice.
>> Jerome - ve7ass
>> Vancouver
>> 
>> 
>> _______________________________________________
>> nos-bbs mailing list
>> nos-bbs at tapr.org
>> http://www.tapr.org/mailman/listinfo/nos-bbs
> 
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> http://www.tapr.org/mailman/listinfo/nos-bbs