[nos-bbs] Compile Jnos

[Niels Ruiter]

Tnx.....?

73 Niels

> -----Oorspronkelijk bericht-----
> Van: nos-bbs [mailto:nos-bbs-bounces at tapr.org] Namens Niels Ruiter
> Verzonden: dinsdag 26 januari 2016 7:18
> Aan: nos-bbs at tapr. org
> Onderwerp: Re: [nos-bbs] Compile Jnos
> 
> Hi Maiko,
> 
> I have read the file`s. Thank you for pointing that out.
> I`m running in some kind of trouble.
> 
> I create a user with...
> 
> root at pd2lt:/home/pd2lt/jnos# ./jnospwmgr -a PD2LT -w enter your
> password PASSWORDWITHCAPITALLETTERS
> 
> There is a file in de directory /home/pd2lt/jnos/users/ "pd2lt.1.dat"
> 
> mbox fbb 3 (if i do not use this i get "FBB error, last read : *** [2]
> Use
> B2 protocol"
> mbox winlinkcall PD2LT
> 
> -------
> wl2k
> telnet server.winlink.org 8772 telpac
> +Callsign :
> ..PD2LT
> +Password :
> .CMSTelnet
> wl2k
> -------
> 
> The log show`s
> 
> 06:02:36  116.212.194.60:8772 - MBOX (wl2k) connected
> 06:02:37  116.212.194.60:8772 - [PD2LT] requesting secure login
> 06:02:37  116.212.194.60:8772 - MBOX (wl2k) forwarding
> 06:02:38  - MBOX (wl2k) FBB error, last read : *** [1] Secure login
> failed - account password does not match. - Disconnecting
> (44.137.31.33)
> 
> I use the exactly the same password with RMS Express.
> 
> Print out of the trace
> 
> Tue Jan 26 05:43:49 2016 - tun0 recv:
> IP: len 51 71.7.139.22->44.137.31.33 ihl 20 ttl 114 DF prot TCP
> TCP: 8772->1027 Seq x448fc940 Ack x3b26012 ACK PSH Wnd 64230 Data 11
> 0000  Password :.
> 
> Tue Jan 26 05:43:49 2016 - tun0 recv:
> IP: len 61 71.7.139.22->44.137.31.33 ihl 20 ttl 114 DF prot TCP
> TCP: 8772->1027 Seq x448fc94b Ack x3b26012 ACK PSH Wnd 64230 Data 21
> 0000  [WL2K-3.2-B2FWIHJM$].
> 
> Tue Jan 26 05:43:49 2016 - tun0 recv:
> IP: len 54 71.7.139.22->44.137.31.33 ihl 20 ttl 114 DF prot TCP
> TCP: 8772->1027 Seq x448fc960 Ack x3b26012 ACK PSH Wnd 64230 Data 14
> 0000  ;PQ: 45506890.
> 
> Tue Jan 26 05:43:49 2016 - tun0 sent:
> IP: len 40 44.137.31.33->71.7.139.22 ihl 20 ttl 224 prot TCP
> TCP: 1027->8772 Seq x3b26012 Ack x448fc96e ACK Wnd 2048
> 
> Tue Jan 26 05:43:49 2016 - tun0 recv:
> IP: len 54 71.7.139.22->44.137.31.33 ihl 20 ttl 114 DF prot TCP
> TCP: 8772->1027 Seq x448fc96e Ack x3b26012 ACK PSH Wnd 64230 Data 14
> 0000  Halifax CMS >.
> 
> Tue Jan 26 05:43:49 2016 - tun0 sent:
> IP: len 89 44.137.31.33->71.7.139.22 ihl 20 ttl 224 prot TCP
> TCP: 1027->8772 Seq x3b26012 Ack x448fc97c ACK PSH Wnd 2048 Data 49
> 0000  ;FW: VE4KLM.[JNOS-2.0j.7u-B2FHIM$].;PR: 28459448.
> 
> Tue Jan 26 06:02:38 2016 - tun0 sent:
> IP: len 43 44.137.31.33->116.212.194.60 ihl 20 ttl 224 prot TCP
> TCP: 1027->8772 Seq x38d1043 Ack x31ca83ac ACK PSH Wnd 2048 Data 3 0000
> FF.
> 
> Segmentation fault
> root at pi8lap:/home/pd2lt/jnos#
> 
> I do not no what i did wrong. Do you have any idea.
> 
> 73 Niels
> 
> > -----Oorspronkelijk bericht-----
> > Van: Maiko Langelaar [mailto:maiko at pcs.mb.ca]
> > Verzonden: maandag 25 januari 2016 17:10
> > Aan: Niels Ruiter
> > Onderwerp: RE: [nos-bbs] Compile Jnos
> >
> > Hi Niels,
> >
> > > I`m sorry. I think i that not do a "make clean"
> >
> > You should not have to on a clean 'install', not sure what happened
> > then.
> >
> > > root at pd2lt:/home/pd2lt/jnos# ./jnospwmgr -a pd2lt enter your
> > > password niels No such file or directory
> >
> > You should read the release notes :
> >
> >      http://www.langelaar.net/jnos2/documents/changes.txt
> >
> > Section 2) says you have to create the users directory, which I
> > suspect has not happened based on the above error message.
> >
> > Also, for basic winlink connectivity, here is the important page on
> > how to configure JNOS to do what you need :
> >
> >
> > http://www.langelaar.net/jnos2/documents/practical/wl2kcms2013.html
> >
> > PS : ignore the part about the 'smtp:' entries for now, not required.
> >
> > Maiko
> 
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> http://www.tapr.org/mailman/listinfo/nos-bbs