[nos-bbs] bleeding edge (version 2) for testing

['Gustavo Ponza']

Hi,
>
> The ONLY difference here with regard to the big IAC (telnet forwarding)
> is the options, there is no more 'noiac', it's now 'enableiac', the
> actual IAC code is the same, so things should work still.

for me the previous 'bleeding' is perfect in all aspects: no errors at all.

The present bleeding results (always here) faulty with all kinda PBBS
with or without 'enableiac' parameter, and as per inbound as per
outbound forwarding session. The WL2K session remain hangup :(


INBOUND:

11:30:34  44.134.32.240:56996 - MBOX (i3xty) forwarding
11:30:34  44.134.32.240:56996 - MBOX (i3xty) proposal FA P I0OJJ 
I3XTY.IVEN.ITA.EU I3XTY 22337_I0OJJ 1385
11:30:34  44.134.32.240:56996 - MBOX (i3xty) got response FS +
11:30:34  44.134.32.240:56996 - MBOX (i3xty) lzhuf compress 873/1373 = 
36 percent
11:30:35  44.134.32.240:56996 - MBOX (i3xty) FBB error *** rcvd invalid 
block-id
11:30:35  44.134.32.240:56996 - MBOX (i3xty) exit


OUTBOUND:

11:32:36  2.234.134.144:4719 (1039) - MBOX (i3xty) forwarding
11:32:36  2.234.134.144:4719 (1039) - MBOX (i3xty) proposal FA P I0OJJ 
I3XTY.IVEN.ITA.EU I3XTY 22337_I0OJJ 1385
11:32:37  2.234.134.144:4719 (1039) - MBOX (i3xty) got response FS +
11:32:37  2.234.134.144:4719 (1039) - MBOX (i3xty) lzhuf compress 
873/1373 = 36 percent
11:32:37  79.22.69.252:4719 (1042) - MBOX (ik6zde) forwarding
11:32:37  79.22.69.252:4719 (1042) - MBOX (ik6zde) incoming proposal FA 
B CX2SA WW EQUAKE 42639-CX2SA 1763
11:32:37  79.22.69.252:4719 (1042) - MBOX (ik6zde) our response FS +
11:32:37  - fbb protocol error, expecting STX or EOT
11:32:37  79.22.69.252:4719 (1042) - lzhuf: detected FBB protocol error 3
11:32:37  79.22.69.252:4719 (1042) - FBBFWD: recv_yapp() error.
11:32:37  79.22.69.252:4719 (1042) - MBOX (ik6zde) FBB error, last read 
: F> 38
11:32:37  79.22.69.252:4719 (1042) - MBOX (ik6zde) fwd exit
11:32:37  2.234.134.144:4719 (1039) - MBOX (i3xty) FBB error *** rcvd 
invalid block-id
11:32:37  2.234.134.144:4719 (1039) - MBOX (i3xty) fwd exit


>
> I have updated the JNOS release history, it's got all the information
> you will need, plus technical notes. There are also other goodies, in
> particular the SNMP server is now 'secure', have fun with it.

The previous mrtg/snmp setup is not more allowed.

11:15:01 snmpd: 44.134.32.240:45488 - [jnos] not allowed
11:15:03 snmpd: 44.134.32.240:45488 - [jnos] not allowed
11:15:05 snmpd: 44.134.32.240:45488 - [jnos] not allowed

>
> If anyone is curious or absolutely bored, check out the new RRDTOOL/MRTG
> traffic stats chart on the main JNOS webpage. Updated every 15 minutes.

Good! A minimal instruction on RRDTOOL setup will be useful :)

73, gus