[nos-bbs] Raspberry Pi Jnos exiting every 15 minutes or less

Wed Feb 12 11:20:43 EST 2014

I am using the F6BVP image with AX25, DXSpider, Fbb, Fpac preintalled burned into a 32GB SD card.  Later installed Jnos, APRX, and LinBPQ.  All the other software are working OK.  My only problem is Jnos that is keep exiting in every 15 minutes or less.  I set it to respawn automatically.   I tried jnos2f and jnos2fx4 compiled from the source OK but still exiting.  The logs doesn't show me why it is exiting.

JNOS LOG:
09:54:25  - allocating maximum of 24 Axip (axudp + axip) devices
09:54:25  - allocating maximum of 24 dynamic gateways for routes
09:54:26  - using new [tun0] device
09:54:26  - tun_rx - listening for packets
09:55:07  - JNOS 2.0j.4 (Linux) was started
10:09:51  - allocating maximum of 24 Axip (axudp + axip) devices
10:09:51  - allocating maximum of 24 dynamic gateways for routes
10:09:51  - using new [tun0] device
10:09:51  - tun_rx - listening for packets
10:10:33  - JNOS 2.0j.4 (Linux) was started
10:19:13  - allocating maximum of 24 Axip (axudp + axip) devices
10:19:13  - allocating maximum of 24 dynamic gateways for routes
10:19:14  - using new [tun0] device
10:19:14  - tun_rx - listening for packets
10:19:55  - JNOS 2.0j.4 (Linux) was started
10:20:10  - allocating maximum of 24 Axip (axudp + axip) devices
10:20:10  - allocating maximum of 24 dynamic gateways for routes
10:20:10  - using new [tun0] device
10:20:10  - tun_rx - listening for packets
10:20:51  - JNOS 2.0j.4 (Linux) was started

SYSLOG:
Feb 12 10:19:37 hp2ng netromd[3139]: receiving NODES broadcast on port lan from HP2NG-6
Feb 12 10:19:55 hp2ng kernel: [  160.052280] IPv4: martian source 200.46.129.3 from 44.163.22.12, on dev tun0
Feb 12 10:19:55 hp2ng kernel: [  160.076090] IPv4: martian source 200.46.129.3 from 44.163.22.12, on dev tun0
Feb 12 10:19:55 hp2ng kernel: [  160.102165] IPv4: martian source 200.46.129.3 from 44.163.22.12, on dev tun0
Feb 12 10:20:10 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 786 APRS Queues 0 0#015
Feb 12 10:20:10 hp2ng netromd[3139]: receiving NODES broadcast on port bpq from HP2NG-2
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: route to me
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: route to me
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: route to me
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: quality less than worst_qual
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: quality less than worst_qual
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: quality less than worst_qual
Feb 12 10:20:10 hp2ng netromd[3139]: netromr: add_node: quality less than worst_qual
Feb 12 10:20:10 hp2ng NetworkManager[2896]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0)
Feb 12 10:20:10 hp2ng NetworkManager[2896]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0)
Feb 12 10:20:10 hp2ng NetworkManager[2896]:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found.
Feb 12 10:20:34 hp2ng netromd[3139]: receiving NODES broadcast on port lan from HP2NG-6
Feb 12 10:20:51 hp2ng kernel: [  216.684161] IPv4: martian source 200.46.129.3 from 44.163.22.12, on dev tun0
Feb 12 10:20:51 hp2ng kernel: [  216.707724] IPv4: martian source 200.46.129.3 from 44.163.22.12, on dev tun0
Feb 12 10:20:52 hp2ng kernel: [  216.733542] IPv4: martian source 200.46.129.3 from 44.163.22.12, on dev tun0
Feb 12 10:21:05 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 786 APRS Queues 0 0#015
Feb 12 10:22:00 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:22:31 hp2ng dbus[2812]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Feb 12 10:22:31 hp2ng dbus[2812]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Feb 12 10:22:56 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:23:31 hp2ng kernel: [  375.843236] Shorewall:net2tun:DROP:IN=eth0 OUT=tun0 MAC=b8:27:eb:e1:b2:ee:00:16:17:4d:70:d9:08:00:45:00:00:81:e3:32:00:00:de:5d:66:88 SRC=200.46.129.3 DST=200.46.129.4 LEN=129 TOS=0x00 PREC=0x00 TTL=222 ID=58162 PROTO=93 
Feb 12 10:23:51 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:24:46 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:25:02 hp2ng kernel: [  466.821519] Shorewall:net2tun:DROP:IN=eth0 OUT=tun0 MAC=b8:27:eb:e1:b2:ee:88:43:e1:dc:7f:40:08:00:45:00:00:28:01:00:00:00:6a:06:0b:dd SRC=198.40.52.152 DST=200.46.129.4 LEN=40 TOS=0x00 PREC=0x00 TTL=106 ID=256 PROTO=TCP SPT=6000 DPT=3389 WINDOW=16384 RES=0x00 SYN URGP=0 
Feb 12 10:25:42 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:26:37 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:27:32 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015
Feb 12 10:28:22 hp2ng kernel: [  667.562527] Shorewall:net2tun:DROP:IN=eth0 OUT=tun0 MAC=b8:27:eb:e1:b2:ee:88:43:e1:dc:7f:40:08:00:45:00:00:30:a1:0a:00:00:68:06:cf:b6 SRC=61.129.91.83 DST=200.46.129.4 LEN=48 TOS=0x00 PREC=0x00 TTL=104 ID=41226 PROTO=TCP SPT=24397 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0 
Feb 12 10:28:27 hp2ng LINBPQ[3289]: BPQ32 Heartbeat Buffers 787 APRS Queues 0 0#015

I tried gdb but it said no debugging symbols.  I re-compiled the jnos binary without stripping but still shows the no debugging symbols.  I tried in the makefile debug static -g3 but does not compile and exit with Error.

root at hp2ng:/home/hp2at# ps -ef | grep jnos
root      3874     1  0 10:47 tty8     00:00:00 /jnos/jnos -d /jnos -v
root      3961  3959  0 10:50 pts/10   00:00:00 grep jnos
root at hp2ng:/home/hp2at# gdb -p 3874
GNU gdb (GDB) 7.4.1-debian
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Attaching to process 3874
Reading symbols from /jnos/jnos...done.
Reading symbols from /usr/lib/arm-linux-gnueabihf/libcofi_rpi.so...(no debugging symbols found)...done.
Loaded symbols for /usr/lib/arm-linux-gnueabihf/libcofi_rpi.so
Reading symbols from /lib/arm-linux-gnueabihf/libncurses.so.5...(no debugging symbols found)...done.
Loaded symbols for /lib/arm-linux-gnueabihf/libncurses.so.5
Reading symbols from /lib/arm-linux-gnueabihf/libtinfo.so.5...(no debugging symbols found)...done.
Loaded symbols for /lib/arm-linux-gnueabihf/libtinfo.so.5
Reading symbols from /lib/arm-linux-gnueabihf/libgcc_s.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib/arm-linux-gnueabihf/libgcc_s.so.1
Reading symbols from /lib/arm-linux-gnueabihf/libc.so.6...Reading symbols from /usr/lib/debug/lib/arm-linux-gnueabihf/libc-2.13.so...done.
done.
Loaded symbols for /lib/arm-linux-gnueabihf/libc.so.6
Reading symbols from /lib/arm-linux-gnueabihf/libdl.so.2...Reading symbols from /usr/lib/debug/lib/arm-linux-gnueabihf/libdl-2.13.so...done.
done.
Loaded symbols for /lib/arm-linux-gnueabihf/libdl.so.2
Reading symbols from /lib/ld-linux-armhf.so.3...(no debugging symbols found)...done.
Loaded symbols for /lib/ld-linux-armhf.so.3
0xb6e9bd80 in select () at ../sysdeps/unix/syscall-template.S:82
82      ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb)

I tried looking at the autoexec.nos for anything not right, the network configuration, shorewall firewall configuration, cron jobs, not running the other software LinBPQ, APRX, etc but still exiting in 15 minutes or less.

Any help where to look or what to try to make JNOS work.

Thanks,
Jose / HP2AT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20140212/0a3ae4c0/attachment.html>