[nos-bbs] UDP Port Unreachable - problem found

[Michael E. Fox - N6MEF]

I'll try it today.  Thanks.

-----Original Message-----
From: nos-bbs-bounces at tapr.org [mailto:nos-bbs-bounces at tapr.org] On Behalf
Of Maiko Langelaar
Sent: Sunday, November 17, 2013 5:12 AM
To: TAPR xNOS Mailing List
Subject: Re: [nos-bbs] UDP Port Unreachable - problem found


Rsync the jnosX module, then configure your axudp with custom
ports (as in the docmentation), BUT use a value of -1 for your
source port parameter.

I hope this very small change solves this issue. The overall
design is not affected by this at all. It simply gives you the
ability to accept AXUDP from ANY source port.

Make sure you ip access (firewall) axudp incoming to only those
people you have as remote systems, especially if you choose to
this feature of ANY source port.

Let me know if this works for you (or not). If not, then I
probably know why, but lets wait for that possibility first.

Maiko

_______________________________________________
nos-bbs mailing list
nos-bbs at tapr.org
http://www.tapr.org/mailman/listinfo/nos-bbs