[nos-bbs] connect via

[Brett Friermood]

I had the very same question a couple weeks ago. When you use via JNOS
remembers it as a route to that station assuming you need it all the
time.

Use the 'ax25 route' command and subcommands. Specifically for your
situation would be 'ax25 route drop ve3pz-1 2m'.

Brett
KQ9N



On Thu, Apr 19, 2012 at 8:57 AM, Michel Beaudry VE2BCW
<ve2bcw at ve2uqh.ampr.org> wrote:
> Hi,
>
> At the jnos bbs command line when I type:
> c 2m ve3pz-1 s
>
> The s is a typing error (it can be any letter).
>
> jnos will send the following string:
>
> ve2bcw->ve3pz-1 v S
>
> jnos tries to connect to ve3pz-1 via digi S
> of course there is no digi S
>
> Later when I try:
> c 2m ve3pz-1
>
> jnos remembers the last connect string and sends again:
> ve2bcw->ve3pz-1 v S
>
> I tried this with different version of jnos.
>
> The only way I could reset this (other than a reboot) was to send:
>
> c 2m ve3pz-1 v
>
> This returns me to the jnos bbs command line.
>
>
> Any ideas ?
>
> 73,
> Michel
> ve2bcw
> sysop ve2uqh.ampr.org
>
>
>
>
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs