[nos-bbs] USB to comm adapter
N0MR
n0mr at lakenet.com
Wed Nov 30 23:35:26 EST 2011
The control panel and device manager works for comm boards but not for USB
to comm adaptors. It tells the port but not the address and interrupt. Has
anyone used a USB to comm adapter with JNOS?
Jerry, N0MR
----- Original Message -----
From: "ve1bf" <arto at ns.sympatico.ca>
To: "TAPR xNOS Mailing List" <nos-bbs at tapr.org>
Sent: Sunday, November 27, 2011 3:55 PM
Subject: Re: [nos-bbs] USB to comm adapter
> try start control panel ...system...hardware....hareware
> devices....chosse your port ...you can then set the port
> number or you can keep it the way windows found it
>
> ----- Original Message -----
> From: "N0MR" <n0mr at lakenet.com>
> To: "TAPR xNOS Mailing List" <nos-bbs at tapr.org>
> Sent: Sunday, November 27, 2011 4:46 PM
> Subject: [nos-bbs] USB to comm adapter
>
>
>>I would like to run JNOS 1.11f on a Windows XP computer that does not have
>>a comm port. If I use a USB to comm adaptor on the XP machine, will that
>>work and if so how do I find the interrupt and address of the comm port
>>for the attach statement? All I can see is it is com4. Does the interrupt
>>and address come from the USB side and how do I find the information.
>>
>> Thank you,
>>
>> Jerry, N0MR
>>
>>
>> _______________________________________________
>> nos-bbs mailing list
>> nos-bbs at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs
>>
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs
>
>
More information about the nos-bbs
mailing list