[nos-bbs] Jnos2 - Tun0 not working

[jerome schatten]

Mark... look at /proc and do 'cat modules' to see if tun0 is there after
you boot jnos. If it is, try pinging 192.168.2.1 and 192.168.2.2. If
that works, I think tun0 is working. Go to another machine on your lan
and either telnet or ssh into the jnos machine, and then telnet into
192.168.2.2. You should get a login prompt. 

On Wed, 2010-11-17 at 15:17 -0500, Mark Phillips wrote:
> I have the same problem and I'm a little over half your age!!
> 
> On 11/17/2010 03:01 PM, jerome schatten wrote:
> > Cancel the first question. Got it going -- finger and brain problem at
> > age 73.
> 
>