[nos-bbs] Trace

[ve1fyi]

try trace (interface name) 0111
once you have done that from the f10 screen
type trace (interface) it should come up and tell you
input output (ascii dump) if all that works 
you should be able to see the trace from the f 9 screen
hope this helps....take care all ...Art 
----- Original Message ----- 
From: "Bob Fahnestock" <wh6io at yahoo.com>
To: <kalish.doug at gmail.com>; "TAPR xNOS Mailing List" <nos-bbs at tapr.org>
Sent: Friday, August 07, 2009 10:44 AM
Subject: Re: [nos-bbs] Trace


> try trace port1 0311
> Bob/wh6io
> 
> --- On Thu, 8/6/09, doug at kalish.com <doug at kalish.com> wrote:
> 
>> From: doug at kalish.com <doug at kalish.com>
>> Subject: [nos-bbs] Trace
>> To: nos-bbs at tapr.org
>> Date: Thursday, August 6, 2009, 9:46 PM
>> Is there a trick to
>> using the trace command?  I've tried 'trace port1
>> 1110' and variations but I've never seen any
>> output.
>> 
>> 
>> 
>> 
>> 
>> -----Inline Attachment Follows-----
>> 
>> _______________________________________________
>> nos-bbs mailing list
>> nos-bbs at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs
>> 
> 
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs