[nos-bbs] JNOS ethernet connection

[Bob Tenty]

With the aid of  a virtual device driver (NDIS3PKT  and others) you can access the network card from
jnos and from windows at the same time.

See  http://www.gb7iph.demon.co.uk/AR_Soft/arsoft.html

look for the kipgwin99.doc


73,

Bob VE3TOK

----- Original Message ----- 
From: <maiko at pcs.mb.ca>
To: "TAPR xNOS Mailing List" <nos-bbs at lists.tapr.org>
Sent: July 28, 2005 3:00 AM
Subject: Re: [nos-bbs] JNOS ethernet connection



Just in case this does not get back to w0mr.ampr.org ...

---------- Forwarded message ----------
Date: Wed, 27 Jul 2005 21:51:44 -0500 (CDT)
From: maiko
To: w0mr
Subject: Re: [nos-bbs] JNOS ethernet connection

Hi Jerry,

> I'm running JNOS 1.11f as a DOS window in Windows 95.

The only way I can think of having DIRECT access to any network card
is to a) make sure Windows has NO CONTROL over it, then b) load a packet
driver for that card in the DOS WINDOW before you run JNOS in it. That
*should* work, however the question is then finding a suitable packet
driver for the specific card.

Attaching to the packet driver from within JNOS is straightforward. If
you need the syntax, let me know.

> but is that driver only active on DOS mode ?

You can load it in your autoexec.bat BEFORE windows starts up, BUT again,
you have to make sure that Windows does not try to grab control of the card
when Windows starts up.

Hope that helps.

Maiko Langelaar / VE4KLM
http://www.langelaar.net
JNOS 2.0 Project

_______________________________________________
nos-bbs mailing list
nos-bbs at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/nos-bbs