[nos-bbs] jnos2.0c4 Linux restarting, strip

Jose Ng Lee hp2cwb at cwpanama.net
Sun Apr 10 02:33:16 EDT 2005


Hi,

I compiled a JNOS 2.0c4 with NOSAPRS binary for Linux.  The system is stable 
until I issue a "n" command to show the list of netrom nodes.  After the "n" 
command the system restart.  I put a line in "inittab" to restart JNOS 
everytime it crashes.  So, the JNOS may be crashing and then restarting.  Is 
the
large quantity of netrom nodes listed affect the JNOS 2.0c4 and crash?  I 
have looked at the log but don't find any error and just see it is 
restarting:

LOG:
18:04:57  201.224.98.152:3289 - MBOX login: hp2at
18:04:57  201.224.98.152:3289 - MBOX open
18:05:08  - allocating maximum of 24 Axip (axudp + axip) devices
18:05:08  - allocating maximum of 24 dynamic gateways for routes
18:05:08  - JNOS 2.0c4 (Linux) was started (availmem=3085008896)
18:05:43  201.224.98.152:3290 - MBOX login: hp2at
18:05:43  201.224.98.152:3290 - MBOX open
18:05:49  - allocating maximum of 24 Axip (axudp + axip) devices
18:05:49  - allocating maximum of 24 dynamic gateways for routes
18:05:49  - JNOS 2.0c4 (Linux) was started (availmem=3085008896)
18:06:31  HP2AT-10 on port 2m - MBOX open
18:06:43  - allocating maximum of 24 Axip (axudp + axip) devices
18:06:43  - allocating maximum of 24 dynamic gateways for routes
18:06:43  - JNOS 2.0c4 (Linux) was started (availmem=3085008896)
18:07:09  HP2AT-10 on port 2m - MBOX open

Anyone having the same problem?

Strip:
My compile binary for Linux JNOS 2.0c4 comes out to be about 9MB.  With the 
strip command, the binary comes out to be about 1MB.  Does stripping the 
binary have any affect on the JNOS executable?  I tested both the strip and 
without strip binary, and I still have the restarting "n" command problem.

Thanks for any help.

JOSE / HP2AT





More information about the nos-bbs mailing list