<div dir="ltr">I've had mine going continuously for a little over 2 months.<div><br></div><div>I am K7AZJ, and my QTH is Phoenix. I have gotten as far away as Eastern Russia, and Hawaii. Mostly US, and Canada.</div><div><br></div><div>Running with a dedicated Rpi 2 and 20m vertical.</div><div><br></div><div>For those who profess to be Noobies. Let me explain a little.</div><div><br></div><div>The reason you have to put sudo in front of the command is because the pi user does not have the privileges it needs to run. By putting sudo in front, you "become" root (which is the all powerful user, on unix and linux systems).</div><div><br></div><div>The reason you must be in the directory to run it, is because you told it so on the command line.</div><div><br></div><div>./ means run from the current directory (hence the dot).</div><div><br></div><div>You could easily run it from anywhere as long as the path was right. So if you had the wspr executable in a directory named bin in your home directory then </div><div>"sudo /home/pi/bin/wspr" would be just as good. I moved my executable to my bin directory and run it that way, myself.</div><div><br></div><div>Also according to the README file, I added several 0's at the end of the command to only transmit every 30 minutes (14 0's I think). I feel that every 2 minutes is too frequently for me.</div><div><br></div><div>Anyway, I hope my explanation is helpful to some. </div><div><br></div><div>Jerry</div><div> </div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div><br></div><div>--</div><div dir="ltr">Extra Ham Operator: K7AZJ<br>Registered Linux User: 275424<br>Raspberry Pi and Openscad developer<br><br>
<p><font size="2" face="arial, helvetica, sans-serif"><i>The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...".<br></i>- Isaac. Asimov</font></p></div></div></div></div></div></div></div></div></div></div></div></div></div></div>
<br><div class="gmail_quote">On Mon, Mar 27, 2017 at 5:52 PM, Richard Waller <span dir="ltr"><<a href="mailto:rewaller@verizon.net" target="_blank">rewaller@verizon.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Todd, I ran mine for about ten minutes. My qth is central Virginia. My signal was heard all over the u.s. and as far as Western Canada. I'm figuring close to 40,000 miles per watt. I'm using an endfed halfwave antenna. Amazing stuff. Rick. Ka4ohm.<br>
<br>
Sent from my iPad<br>
<div class="HOEnZb"><div class="h5"><br>
> On Mar 27, 2017, at 8:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
><br>
> Thanks for the reply Brad and Richard,<br>
> I am going to leave things alone and not do any more updates for awhile and see how it goes.<br>
> Yup my signal is mostly like a tone so guess things are working.<br>
> Time to get it in the shack and hooked up to a 20m antenna.<br>
> Thanks again<br>
> Todd<br>
><br>
><br>
> ------------------------------<wbr>--------------------<br>
> From: <<a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a>><br>
> Sent: Monday, March 27, 2017 4:24 PM<br>
> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
> Subject: hfsig Digest, Vol 31, Issue 3<br>
><br>
>> Send hfsig mailing list submissions to<br>
>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>><br>
>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>> or, via email, send a message with subject or body 'help' to<br>
>> <a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a><br>
>><br>
>> You can reach the person managing the list at<br>
>> <a href="mailto:hfsig-owner@tapr.org">hfsig-owner@tapr.org</a><br>
>><br>
>> When replying, please edit your Subject line so it is more specific<br>
>> than "Re: Contents of hfsig digest..."<br>
>><br>
>><br>
>> Today's Topics:<br>
>><br>
>> 1. Re: hfsig Digest, Vol 31, Issue 2 (todd)<br>
>> 2. Re: Problem with operation (Brad Farr)<br>
>> 3. Re: hfsig Digest, Vol 31, Issue 2 (todd)<br>
>> 4. Re: hfsig Digest, Vol 31, Issue 2 (Richard Waller)<br>
>><br>
>><br>
>> ------------------------------<wbr>------------------------------<wbr>----------<br>
>><br>
>> Message: 1<br>
>> Date: Mon, 27 Mar 2017 15:17:30 -0800<br>
>> From: "todd" <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>><br>
>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>> Subject: Re: [hfsig] hfsig Digest, Vol 31, Issue 2<br>
>> Message-ID: <<wbr>A3862F1AB56C4B3CA08CB1A5753544<wbr>B4@LivingroomPc><br>
>> Content-Type: text/plain; format=flowed; charset="utf-8";<br>
>> reply-type=original<br>
>><br>
>> Thanks for the reply Bob, That’s what I did. Was in "cd WsprryPi " Doing a<br>
>> complete reload. Ended up that the green light flashed every one second and<br>
>> couldn't stop it even with a reboot.<br>
>><br>
>> When I typed sudo ./wsp -r -o -s wd6dfh CN84ke 20 20m it locked up the<br>
>> Pi 3B and had to recycle the power. Nothing worked, mouse or keyboard.<br>
>><br>
>> Thanks Richard.......That is the string that I used and it would lock up the<br>
>> Pi 3B and as above had to cycle the power.<br>
>><br>
>> Also when I install the board the green LED starts blinking........Thinking<br>
>> that I have a bad Pi 3b or the firmware is corrupted.<br>
>><br>
>> Did all the updates prior to trying the board.<br>
>><br>
>> Todd<br>
>><br>
>> ------------------------------<wbr>--------------------<br>
>> From: <<a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a>><br>
>> Sent: Monday, March 27, 2017 2:55 PM<br>
>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>> Subject: hfsig Digest, Vol 31, Issue 2<br>
>><br>
>>> Send hfsig mailing list submissions to<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>><br>
>>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>> or, via email, send a message with subject or body 'help' to<br>
>>> <a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a><br>
>>><br>
>>> You can reach the person managing the list at<br>
>>> <a href="mailto:hfsig-owner@tapr.org">hfsig-owner@tapr.org</a><br>
>>><br>
>>> When replying, please edit your Subject line so it is more specific<br>
>>> than "Re: Contents of hfsig digest..."<br>
>>><br>
>>><br>
>>> Today's Topics:<br>
>>><br>
>>> 1. Problem with operation (todd)<br>
>>> 2. Re: Problem with operation (Bob Cutter)<br>
>>> 3. Re: Problem with operation (Dennis Hall)<br>
>>> 4. Re: Problem with operation (Richard Waller)<br>
>>><br>
>>><br>
>>> ------------------------------<wbr>------------------------------<wbr>----------<br>
>>><br>
>>> Message: 1<br>
>>> Date: Mon, 27 Mar 2017 09:45:49 -0800<br>
>>> From: "todd" <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>><br>
>>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: [hfsig] Problem with operation<br>
>>> Message-ID: <<wbr>59E7930EDE7F429C860CA16EC7B8B6<wbr>FA@LivingroomPc><br>
>>> Content-Type: text/plain; charset="iso-8859-1"<br>
>>><br>
>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>> problem here).<br>
>>> Went through the latest install instructions in which everything seemed<br>
>>> ok.<br>
>>> I then typed this in:<br>
>>> wspr -r -o -s wd6dfh CN84ke 20 20m enter<br>
>>><br>
>>> and I get this message can't open /dev/mem<br>
>>> Then it just stops. Did this not get installed when I set it up or does it<br>
>>> have to be set up after the install? Am a rank noob when it comes to<br>
>>> Linux.<br>
>>><br>
>>> If I use the old way:<br>
>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>><br>
>>> the screen locks up and the power to the Raspberry has to be removed to<br>
>>> re-boot.<br>
>>><br>
>>> Any help would be much appreciated.<br>
>>><br>
>>> Thanks<br>
>>> Todd WD6DFH<br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/27dbca06/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/27dbca06/attachment-<wbr>0001.html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Message: 2<br>
>>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)<br>
>>> From: Bob Cutter <<a href="mailto:ki0g@yahoo.com">ki0g@yahoo.com</a>><br>
>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: Re: [hfsig] Problem with operation<br>
>>> Message-ID: <<a href="mailto:1795269654.4605517.1490637558675@mail.yahoo.com">1795269654.4605517.<wbr>1490637558675@mail.yahoo.com</a>><br>
>>> Content-Type: text/plain; charset="utf-8"<br>
>>><br>
>>> blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px<br>
>>> #715FFA solid !important; padding-left:1ex !important;<br>
>>> background-color:white !important; } Try:<br>
>>> cd wsprrypi<br>
>>> Then<br>
>>> sudo......<br>
>>> Bob KI0G<br>
>>><br>
>>><br>
>>> Sent from Yahoo Mail for iPhone<br>
>>><br>
>>><br>
>>> On Monday, March 27, 2017, 12:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>><br>
>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>> problem here).Went through the latest install instructions in which<br>
>>> everything seemed ok. I then typed this in:wspr -r -o -s wd6dfh CN84ke 20<br>
>>> 20m enter and I get this message can't open /dev/memThen it just<br>
>>> stops. Did this not get installed when I set it up or does it have to be<br>
>>> set up after the install? Am a rank noob when it comes to Linux. If I use<br>
>>> the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up<br>
>>> and the power to the Raspberry has to be removed to re-boot. Any help<br>
>>> would be much appreciated. ThanksTodd<br>
>>> WD6DFH________________________<wbr>_______________________<br>
>>> hfsig mailing list<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>><br>
>>><br>
>>><br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/85991353/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/85991353/attachment-<wbr>0001.html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Message: 3<br>
>>> Date: Mon, 27 Mar 2017 11:18:53 -0700<br>
>>> From: Dennis Hall <<a href="mailto:dennis@kk7x.us">dennis@kk7x.us</a>><br>
>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: Re: [hfsig] Problem with operation<br>
>>> Message-ID:<br>
>>> <CALKJWmXucEB5ajpNi+<wbr>3x84z5MAamN+Su_UUeGfHYNpFm=<a href="mailto:84dhA@mail.gmail.com">84d<wbr>hA@mail.gmail.com</a>><br>
>>> Content-Type: text/plain; charset="utf-8"<br>
>>><br>
>>> CD WsprryPi<br>
>>><br>
>>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <<a href="mailto:ki0g@yahoo.com">ki0g@yahoo.com</a>> wrote:<br>
>>>><br>
>>>> Try:<br>
>>>><br>
>>>> cd wsprrypi<br>
>>>><br>
>>>> Then<br>
>>>><br>
>>>> sudo......<br>
>>>><br>
>>>> Bob KI0G<br>
>>>><br>
>>>><br>
>>>> Sent from Yahoo Mail for iPhone <<a href="https://yho.com/footer0" rel="noreferrer" target="_blank">https://yho.com/footer0</a>><br>
>>>><br>
>>>> On Monday, March 27, 2017, 12:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>><br>
>>>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>>> problem here).*<br>
>>>> *Went through the latest install instructions in which everything seemed<br>
>>>> ok. *<br>
>>>> *I then typed this in:*<br>
>>>> *wspr -r -o -s wd6dfh CN84ke 20 20m enter*<br>
>>>><br>
>>>> *and I get this message can't open /dev/mem*<br>
>>>> *Then it just stops. Did this not get installed when I set it up or does<br>
>>>> it have to be set up after the install? Am a rank noob when it comes to<br>
>>>> Linux.*<br>
>>>><br>
>>>> *If I use the old way:*<br>
>>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*<br>
>>>><br>
>>>> *the screen locks up and the power to the Raspberry has to be removed to<br>
>>>> re-boot.*<br>
>>>><br>
>>>> *Any help would be much appreciated.*<br>
>>>><br>
>>>> *Thanks*<br>
>>>> *Todd WD6DFH*<br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>><br>
>>>><br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>><br>
>>>><br>
>>><br>
>>><br>
>>> --<br>
>>> <a href="http://rathdrumweather.us" rel="noreferrer" target="_blank">http://rathdrumweather.us</a><br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/13bb2b33/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/13bb2b33/attachment-<wbr>0001.html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Message: 4<br>
>>> Date: Mon, 27 Mar 2017 18:54:59 -0400<br>
>>> From: Richard Waller <<a href="mailto:rewaller@verizon.net">rewaller@verizon.net</a>><br>
>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: Re: [hfsig] Problem with operation<br>
>>> Message-ID: <<a href="mailto:16EF47CA-99F8-4033-92D6-3887556A39C4@verizon.net">16EF47CA-99F8-4033-92D6-<wbr>3887556A39C4@verizon.net</a>><br>
>>> Content-Type: text/plain; charset="utf-8"<br>
>>><br>
>>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of it<br>
>>> starting with -r. Also make sure you are in the WsprryPi directory<br>
>>><br>
>>> Sent from my iPad<br>
>>><br>
>>>> On Mar 27, 2017, at 1:45 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>><br>
>>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>>> problem here).<br>
>>>> Went through the latest install instructions in which everything seemed<br>
>>>> ok.<br>
>>>> I then typed this in:<br>
>>>> wspr -r -o -s wd6dfh CN84ke 20 20m enter<br>
>>>><br>
>>>> and I get this message can't open /dev/mem<br>
>>>> Then it just stops. Did this not get installed when I set it up or does<br>
>>>> it have to be set up after the install? Am a rank noob when it comes to<br>
>>>> Linux.<br>
>>>><br>
>>>> If I use the old way:<br>
>>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>>><br>
>>>> the screen locks up and the power to the Raspberry has to be removed to<br>
>>>> re-boot.<br>
>>>><br>
>>>> Any help would be much appreciated.<br>
>>>><br>
>>>> Thanks<br>
>>>> Todd WD6DFH<br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/a73c8117/attachment.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/a73c8117/attachment.<wbr>html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Subject: Digest Footer<br>
>>><br>
>>> ______________________________<wbr>_________________<br>
>>> hfsig mailing list<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> End of hfsig Digest, Vol 31, Issue 2<br>
>>> ******************************<wbr>******<br>
>>><br>
>><br>
>><br>
>> ------------------------------<br>
>><br>
>> Message: 2<br>
>> Date: Mon, 27 Mar 2017 18:59:15 -0400<br>
>> From: Brad Farr <<a href="mailto:taprsig@unsupported.org">taprsig@unsupported.org</a>><br>
>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>> Subject: Re: [hfsig] Problem with operation<br>
>> Message-ID: <<a href="mailto:AEA8A360-2D3B-4204-86B5-47601D3BBB78@unsupported.org">AEA8A360-2D3B-4204-86B5-<wbr>47601D3BBB78@unsupported.org</a>><br>
>> Content-Type: text/plain; charset="utf-8"<br>
>><br>
>><br>
>>> On Mar 27, 2017, at 1:45 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>><br>
>>> If I use the old way:<br>
>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>><br>
>>> the screen locks up and the power to the Raspberry has to be removed to re-boot.<br>
>>><br>
>><br>
>> I also had the RaspberryPI freeze up. Using the latest Raspbian, and Raspberry Pi 3, if I had other applications open and running then wspr would freeze up the machine. If wspr was the only app running, I had no problems. I didn’t experience freezes with the older Raspbian versions. Doesn’t make sense, because it seemed to have plenty of memory and disk space, but that was my observation.<br>
>><br>
>> Brad<br>
>> -------------- next part --------------<br>
>> An HTML attachment was scrubbed...<br>
>> URL: <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/20ca884b/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/20ca884b/attachment-<wbr>0001.html</a>><br>
>><br>
>> ------------------------------<br>
>><br>
>> Message: 3<br>
>> Date: Mon, 27 Mar 2017 15:53:04 -0800<br>
>> From: "todd" <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>><br>
>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>> Subject: Re: [hfsig] hfsig Digest, Vol 31, Issue 2<br>
>> Message-ID: <<wbr>8D107CC5424E4C4181B520E4904BEC<wbr>94@LivingroomPc><br>
>> Content-Type: text/plain; format=flowed; charset="utf-8";<br>
>> reply-type=original<br>
>><br>
>> Ok think that I got it. Only did the sudo rpi-update after the complete<br>
>> reload and then a reboot. Works but don't know what the signal is supposed<br>
>> to sound kike. Will do the other updates later and see if it still works.<br>
>><br>
>> Thanks all for the feedback.<br>
>><br>
>> Todd wd6dfh<br>
>><br>
>> ------------------------------<wbr>--------------------<br>
>> From: <<a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a>><br>
>> Sent: Monday, March 27, 2017 2:55 PM<br>
>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>> Subject: hfsig Digest, Vol 31, Issue 2<br>
>><br>
>>> Send hfsig mailing list submissions to<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>><br>
>>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>> or, via email, send a message with subject or body 'help' to<br>
>>> <a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a><br>
>>><br>
>>> You can reach the person managing the list at<br>
>>> <a href="mailto:hfsig-owner@tapr.org">hfsig-owner@tapr.org</a><br>
>>><br>
>>> When replying, please edit your Subject line so it is more specific<br>
>>> than "Re: Contents of hfsig digest..."<br>
>>><br>
>>><br>
>>> Today's Topics:<br>
>>><br>
>>> 1. Problem with operation (todd)<br>
>>> 2. Re: Problem with operation (Bob Cutter)<br>
>>> 3. Re: Problem with operation (Dennis Hall)<br>
>>> 4. Re: Problem with operation (Richard Waller)<br>
>>><br>
>>><br>
>>> ------------------------------<wbr>------------------------------<wbr>----------<br>
>>><br>
>>> Message: 1<br>
>>> Date: Mon, 27 Mar 2017 09:45:49 -0800<br>
>>> From: "todd" <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>><br>
>>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: [hfsig] Problem with operation<br>
>>> Message-ID: <<wbr>59E7930EDE7F429C860CA16EC7B8B6<wbr>FA@LivingroomPc><br>
>>> Content-Type: text/plain; charset="iso-8859-1"<br>
>>><br>
>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>> problem here).<br>
>>> Went through the latest install instructions in which everything seemed<br>
>>> ok.<br>
>>> I then typed this in:<br>
>>> wspr -r -o -s wd6dfh CN84ke 20 20m enter<br>
>>><br>
>>> and I get this message can't open /dev/mem<br>
>>> Then it just stops. Did this not get installed when I set it up or does it<br>
>>> have to be set up after the install? Am a rank noob when it comes to<br>
>>> Linux.<br>
>>><br>
>>> If I use the old way:<br>
>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>><br>
>>> the screen locks up and the power to the Raspberry has to be removed to<br>
>>> re-boot.<br>
>>><br>
>>> Any help would be much appreciated.<br>
>>><br>
>>> Thanks<br>
>>> Todd WD6DFH<br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/27dbca06/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/27dbca06/attachment-<wbr>0001.html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Message: 2<br>
>>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)<br>
>>> From: Bob Cutter <<a href="mailto:ki0g@yahoo.com">ki0g@yahoo.com</a>><br>
>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: Re: [hfsig] Problem with operation<br>
>>> Message-ID: <<a href="mailto:1795269654.4605517.1490637558675@mail.yahoo.com">1795269654.4605517.<wbr>1490637558675@mail.yahoo.com</a>><br>
>>> Content-Type: text/plain; charset="utf-8"<br>
>>><br>
>>> blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px<br>
>>> #715FFA solid !important; padding-left:1ex !important;<br>
>>> background-color:white !important; } Try:<br>
>>> cd wsprrypi<br>
>>> Then<br>
>>> sudo......<br>
>>> Bob KI0G<br>
>>><br>
>>><br>
>>> Sent from Yahoo Mail for iPhone<br>
>>><br>
>>><br>
>>> On Monday, March 27, 2017, 12:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>><br>
>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>> problem here).Went through the latest install instructions in which<br>
>>> everything seemed ok. I then typed this in:wspr -r -o -s wd6dfh CN84ke 20<br>
>>> 20m enter and I get this message can't open /dev/memThen it just<br>
>>> stops. Did this not get installed when I set it up or does it have to be<br>
>>> set up after the install? Am a rank noob when it comes to Linux. If I use<br>
>>> the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up<br>
>>> and the power to the Raspberry has to be removed to re-boot. Any help<br>
>>> would be much appreciated. ThanksTodd<br>
>>> WD6DFH________________________<wbr>_______________________<br>
>>> hfsig mailing list<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>><br>
>>><br>
>>><br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/85991353/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/85991353/attachment-<wbr>0001.html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Message: 3<br>
>>> Date: Mon, 27 Mar 2017 11:18:53 -0700<br>
>>> From: Dennis Hall <<a href="mailto:dennis@kk7x.us">dennis@kk7x.us</a>><br>
>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: Re: [hfsig] Problem with operation<br>
>>> Message-ID:<br>
>>> <CALKJWmXucEB5ajpNi+<wbr>3x84z5MAamN+Su_UUeGfHYNpFm=<a href="mailto:84dhA@mail.gmail.com">84d<wbr>hA@mail.gmail.com</a>><br>
>>> Content-Type: text/plain; charset="utf-8"<br>
>>><br>
>>> CD WsprryPi<br>
>>><br>
>>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <<a href="mailto:ki0g@yahoo.com">ki0g@yahoo.com</a>> wrote:<br>
>>>><br>
>>>> Try:<br>
>>>><br>
>>>> cd wsprrypi<br>
>>>><br>
>>>> Then<br>
>>>><br>
>>>> sudo......<br>
>>>><br>
>>>> Bob KI0G<br>
>>>><br>
>>>><br>
>>>> Sent from Yahoo Mail for iPhone <<a href="https://yho.com/footer0" rel="noreferrer" target="_blank">https://yho.com/footer0</a>><br>
>>>><br>
>>>> On Monday, March 27, 2017, 12:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>><br>
>>>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>>> problem here).*<br>
>>>> *Went through the latest install instructions in which everything seemed<br>
>>>> ok. *<br>
>>>> *I then typed this in:*<br>
>>>> *wspr -r -o -s wd6dfh CN84ke 20 20m enter*<br>
>>>><br>
>>>> *and I get this message can't open /dev/mem*<br>
>>>> *Then it just stops. Did this not get installed when I set it up or does<br>
>>>> it have to be set up after the install? Am a rank noob when it comes to<br>
>>>> Linux.*<br>
>>>><br>
>>>> *If I use the old way:*<br>
>>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*<br>
>>>><br>
>>>> *the screen locks up and the power to the Raspberry has to be removed to<br>
>>>> re-boot.*<br>
>>>><br>
>>>> *Any help would be much appreciated.*<br>
>>>><br>
>>>> *Thanks*<br>
>>>> *Todd WD6DFH*<br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>><br>
>>>><br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>><br>
>>>><br>
>>><br>
>>><br>
>>> --<br>
>>> <a href="http://rathdrumweather.us" rel="noreferrer" target="_blank">http://rathdrumweather.us</a><br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/13bb2b33/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/13bb2b33/attachment-<wbr>0001.html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Message: 4<br>
>>> Date: Mon, 27 Mar 2017 18:54:59 -0400<br>
>>> From: Richard Waller <<a href="mailto:rewaller@verizon.net">rewaller@verizon.net</a>><br>
>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: Re: [hfsig] Problem with operation<br>
>>> Message-ID: <<a href="mailto:16EF47CA-99F8-4033-92D6-3887556A39C4@verizon.net">16EF47CA-99F8-4033-92D6-<wbr>3887556A39C4@verizon.net</a>><br>
>>> Content-Type: text/plain; charset="utf-8"<br>
>>><br>
>>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of it<br>
>>> starting with -r. Also make sure you are in the WsprryPi directory<br>
>>><br>
>>> Sent from my iPad<br>
>>><br>
>>>> On Mar 27, 2017, at 1:45 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>><br>
>>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>>> problem here).<br>
>>>> Went through the latest install instructions in which everything seemed<br>
>>>> ok.<br>
>>>> I then typed this in:<br>
>>>> wspr -r -o -s wd6dfh CN84ke 20 20m enter<br>
>>>><br>
>>>> and I get this message can't open /dev/mem<br>
>>>> Then it just stops. Did this not get installed when I set it up or does<br>
>>>> it have to be set up after the install? Am a rank noob when it comes to<br>
>>>> Linux.<br>
>>>><br>
>>>> If I use the old way:<br>
>>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>>><br>
>>>> the screen locks up and the power to the Raspberry has to be removed to<br>
>>>> re-boot.<br>
>>>><br>
>>>> Any help would be much appreciated.<br>
>>>><br>
>>>> Thanks<br>
>>>> Todd WD6DFH<br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>> -------------- next part --------------<br>
>>> An HTML attachment was scrubbed...<br>
>>> URL:<br>
>>> <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/a73c8117/attachment.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/a73c8117/attachment.<wbr>html</a>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> Subject: Digest Footer<br>
>>><br>
>>> ______________________________<wbr>_________________<br>
>>> hfsig mailing list<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>><br>
>>><br>
>>> ------------------------------<br>
>>><br>
>>> End of hfsig Digest, Vol 31, Issue 2<br>
>>> ******************************<wbr>******<br>
>>><br>
>><br>
>><br>
>> ------------------------------<br>
>><br>
>> Message: 4<br>
>> Date: Mon, 27 Mar 2017 20:24:22 -0400<br>
>> From: Richard Waller <<a href="mailto:rewaller@verizon.net">rewaller@verizon.net</a>><br>
>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>> Subject: Re: [hfsig] hfsig Digest, Vol 31, Issue 2<br>
>> Message-ID: <<a href="mailto:ECB85FEC-CC4B-41A3-A809-00C83B3EFB50@verizon.net">ECB85FEC-CC4B-41A3-A809-<wbr>00C83B3EFB50@verizon.net</a>><br>
>> Content-Type: text/plain; charset=us-ascii<br>
>><br>
>> Todd, glad you got it working. The signal sounds pretty much like a pure tone when monitoring on my transceiver. Rick. Ka4ohm.<br>
>><br>
>> Sent from my iPad<br>
>><br>
>>> On Mar 27, 2017, at 7:53 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>><br>
>>> Ok think that I got it. Only did the sudo rpi-update after the complete reload and then a reboot. Works but don't know what the signal is supposed to sound kike. Will do the other updates later and see if it still works.<br>
>>><br>
>>> Thanks all for the feedback.<br>
>>><br>
>>> Todd wd6dfh<br>
>>><br>
>>> ------------------------------<wbr>--------------------<br>
>>> From: <<a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a>><br>
>>> Sent: Monday, March 27, 2017 2:55 PM<br>
>>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>> Subject: hfsig Digest, Vol 31, Issue 2<br>
>>><br>
>>>> Send hfsig mailing list submissions to<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>><br>
>>>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>> or, via email, send a message with subject or body 'help' to<br>
>>>> <a href="mailto:hfsig-request@tapr.org">hfsig-request@tapr.org</a><br>
>>>><br>
>>>> You can reach the person managing the list at<br>
>>>> <a href="mailto:hfsig-owner@tapr.org">hfsig-owner@tapr.org</a><br>
>>>><br>
>>>> When replying, please edit your Subject line so it is more specific<br>
>>>> than "Re: Contents of hfsig digest..."<br>
>>>><br>
>>>><br>
>>>> Today's Topics:<br>
>>>><br>
>>>> 1. Problem with operation (todd)<br>
>>>> 2. Re: Problem with operation (Bob Cutter)<br>
>>>> 3. Re: Problem with operation (Dennis Hall)<br>
>>>> 4. Re: Problem with operation (Richard Waller)<br>
>>>><br>
>>>><br>
>>>> ------------------------------<wbr>------------------------------<wbr>----------<br>
>>>><br>
>>>> Message: 1<br>
>>>> Date: Mon, 27 Mar 2017 09:45:49 -0800<br>
>>>> From: "todd" <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>><br>
>>>> To: <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>>> Subject: [hfsig] Problem with operation<br>
>>>> Message-ID: <<wbr>59E7930EDE7F429C860CA16EC7B8B6<wbr>FA@LivingroomPc><br>
>>>> Content-Type: text/plain; charset="iso-8859-1"<br>
>>>><br>
>>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).<br>
>>>> Went through the latest install instructions in which everything seemed ok.<br>
>>>> I then typed this in:<br>
>>>> wspr -r -o -s wd6dfh CN84ke 20 20m enter<br>
>>>><br>
>>>> and I get this message can't open /dev/mem<br>
>>>> Then it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux.<br>
>>>><br>
>>>> If I use the old way:<br>
>>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>>><br>
>>>> the screen locks up and the power to the Raspberry has to be removed to re-boot.<br>
>>>><br>
>>>> Any help would be much appreciated.<br>
>>>><br>
>>>> Thanks<br>
>>>> Todd WD6DFH<br>
>>>> -------------- next part --------------<br>
>>>> An HTML attachment was scrubbed...<br>
>>>> URL: <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/27dbca06/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/27dbca06/attachment-<wbr>0001.html</a>><br>
>>>><br>
>>>> ------------------------------<br>
>>>><br>
>>>> Message: 2<br>
>>>> Date: Mon, 27 Mar 2017 17:59:18 +0000 (UTC)<br>
>>>> From: Bob Cutter <<a href="mailto:ki0g@yahoo.com">ki0g@yahoo.com</a>><br>
>>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>>> Subject: Re: [hfsig] Problem with operation<br>
>>>> Message-ID: <<a href="mailto:1795269654.4605517.1490637558675@mail.yahoo.com">1795269654.4605517.<wbr>1490637558675@mail.yahoo.com</a>><br>
>>>> Content-Type: text/plain; charset="utf-8"<br>
>>>><br>
>>>> blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Try:<br>
>>>> cd wsprrypi<br>
>>>> Then<br>
>>>> sudo......<br>
>>>> Bob KI0G<br>
>>>><br>
>>>><br>
>>>> Sent from Yahoo Mail for iPhone<br>
>>>><br>
>>>><br>
>>>> On Monday, March 27, 2017, 12:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>><br>
>>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).Went through the latest install instructions in which everything seemed ok. I then typed this in:wspr -r -o -s wd6dfh CN84ke 20 20m enter and I get this message can't open /dev/memThen it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux. If I use the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up and the power to the Raspberry has to be removed to re-boot. Any help would be much appreciated. ThanksTodd WD6DFH________________________<wbr>_______________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>><br>
>>>><br>
>>>><br>
>>>> -------------- next part --------------<br>
>>>> An HTML attachment was scrubbed...<br>
>>>> URL: <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/85991353/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/85991353/attachment-<wbr>0001.html</a>><br>
>>>><br>
>>>> ------------------------------<br>
>>>><br>
>>>> Message: 3<br>
>>>> Date: Mon, 27 Mar 2017 11:18:53 -0700<br>
>>>> From: Dennis Hall <<a href="mailto:dennis@kk7x.us">dennis@kk7x.us</a>><br>
>>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>>> Subject: Re: [hfsig] Problem with operation<br>
>>>> Message-ID:<br>
>>>> <CALKJWmXucEB5ajpNi+<wbr>3x84z5MAamN+Su_UUeGfHYNpFm=<a href="mailto:84dhA@mail.gmail.com">84d<wbr>hA@mail.gmail.com</a>><br>
>>>> Content-Type: text/plain; charset="utf-8"<br>
>>>><br>
>>>> CD WsprryPi<br>
>>>><br>
>>>>> On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <<a href="mailto:ki0g@yahoo.com">ki0g@yahoo.com</a>> wrote:<br>
>>>>><br>
>>>>> Try:<br>
>>>>><br>
>>>>> cd wsprrypi<br>
>>>>><br>
>>>>> Then<br>
>>>>><br>
>>>>> sudo......<br>
>>>>><br>
>>>>> Bob KI0G<br>
>>>>><br>
>>>>><br>
>>>>> Sent from Yahoo Mail for iPhone <<a href="https://yho.com/footer0" rel="noreferrer" target="_blank">https://yho.com/footer0</a>><br>
>>>>><br>
>>>>> On Monday, March 27, 2017, 12:48 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>>><br>
>>>>> *Received my wspr board and installed it in a Raspberry Pi 3B board(no<br>
>>>>> problem here).*<br>
>>>>> *Went through the latest install instructions in which everything seemed<br>
>>>>> ok. *<br>
>>>>> *I then typed this in:*<br>
>>>>> *wspr -r -o -s wd6dfh CN84ke 20 20m enter*<br>
>>>>><br>
>>>>> *and I get this message can't open /dev/mem*<br>
>>>>> *Then it just stops. Did this not get installed when I set it up or does<br>
>>>>> it have to be set up after the install? Am a rank noob when it comes to<br>
>>>>> Linux.*<br>
>>>>><br>
>>>>> *If I use the old way:*<br>
>>>>> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*<br>
>>>>><br>
>>>>> *the screen locks up and the power to the Raspberry has to be removed to<br>
>>>>> re-boot.*<br>
>>>>><br>
>>>>> *Any help would be much appreciated.*<br>
>>>>><br>
>>>>> *Thanks*<br>
>>>>> *Todd WD6DFH*<br>
>>>>> ______________________________<wbr>_________________<br>
>>>>> hfsig mailing list<br>
>>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>>><br>
>>>>><br>
>>>>> ______________________________<wbr>_________________<br>
>>>>> hfsig mailing list<br>
>>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>>><br>
>>>>><br>
>>>><br>
>>>><br>
>>>> --<br>
>>>> <a href="http://rathdrumweather.us" rel="noreferrer" target="_blank">http://rathdrumweather.us</a><br>
>>>> -------------- next part --------------<br>
>>>> An HTML attachment was scrubbed...<br>
>>>> URL: <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/13bb2b33/attachment-0001.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/13bb2b33/attachment-<wbr>0001.html</a>><br>
>>>><br>
>>>> ------------------------------<br>
>>>><br>
>>>> Message: 4<br>
>>>> Date: Mon, 27 Mar 2017 18:54:59 -0400<br>
>>>> From: Richard Waller <<a href="mailto:rewaller@verizon.net">rewaller@verizon.net</a>><br>
>>>> To: TAPR HF Modes SIG Mailing List <<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a>><br>
>>>> Subject: Re: [hfsig] Problem with operation<br>
>>>> Message-ID: <<a href="mailto:16EF47CA-99F8-4033-92D6-3887556A39C4@verizon.net">16EF47CA-99F8-4033-92D6-<wbr>3887556A39C4@verizon.net</a>><br>
>>>> Content-Type: text/plain; charset="utf-8"<br>
>>>><br>
>>>> Todd, I'm a noob too but you need to type sudo ./wspr then the rest of it starting with -r. Also make sure you are in the WsprryPi directory<br>
>>>><br>
>>>> Sent from my iPad<br>
>>>><br>
>>>>> On Mar 27, 2017, at 1:45 PM, todd <<a href="mailto:nexstar1@hughes.net">nexstar1@hughes.net</a>> wrote:<br>
>>>>><br>
>>>>> Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).<br>
>>>>> Went through the latest install instructions in which everything seemed ok.<br>
>>>>> I then typed this in:<br>
>>>>> wspr -r -o -s wd6dfh CN84ke 20 20m enter<br>
>>>>><br>
>>>>> and I get this message can't open /dev/mem<br>
>>>>> Then it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux.<br>
>>>>><br>
>>>>> If I use the old way:<br>
>>>>> sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m<br>
>>>>><br>
>>>>> the screen locks up and the power to the Raspberry has to be removed to re-boot.<br>
>>>>><br>
>>>>> Any help would be much appreciated.<br>
>>>>><br>
>>>>> Thanks<br>
>>>>> Todd WD6DFH<br>
>>>>> ______________________________<wbr>_________________<br>
>>>>> hfsig mailing list<br>
>>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>> -------------- next part --------------<br>
>>>> An HTML attachment was scrubbed...<br>
>>>> URL: <<a href="http://www.tapr.org/pipermail/hfsig/attachments/20170327/a73c8117/attachment.html" rel="noreferrer" target="_blank">http://www.tapr.org/<wbr>pipermail/hfsig/attachments/<wbr>20170327/a73c8117/attachment.<wbr>html</a>><br>
>>>><br>
>>>> ------------------------------<br>
>>>><br>
>>>> Subject: Digest Footer<br>
>>>><br>
>>>> ______________________________<wbr>_________________<br>
>>>> hfsig mailing list<br>
>>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>>>><br>
>>>><br>
>>>> ------------------------------<br>
>>>><br>
>>>> End of hfsig Digest, Vol 31, Issue 2<br>
>>>> ******************************<wbr>******<br>
>>> ______________________________<wbr>_________________<br>
>>> hfsig mailing list<br>
>>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>><br>
>><br>
>><br>
>> ------------------------------<br>
>><br>
>> Subject: Digest Footer<br>
>><br>
>> ______________________________<wbr>_________________<br>
>> hfsig mailing list<br>
>> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
>> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
>><br>
>><br>
>> ------------------------------<br>
>><br>
>> End of hfsig Digest, Vol 31, Issue 3<br>
>> ******************************<wbr>******<br>
> ______________________________<wbr>_________________<br>
> hfsig mailing list<br>
> <a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
> <a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
<br>
______________________________<wbr>_________________<br>
hfsig mailing list<br>
<a href="mailto:hfsig@tapr.org">hfsig@tapr.org</a><br>
<a href="http://www.tapr.org/mailman/listinfo/hfsig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/hfsig</a><br>
</div></div></blockquote></div><br></div>