[hfsig] WSPR module -- fit on Pi board

[Zoltan Doczi]

Hi Orrin,

I came across this extension this might augment your problem:
https://www.adafruit.com/products/1112

73,
ha7dcd
Zoltan

On Thu, Apr 21, 2016 at 8:53 PM, Orrin Winton <orrin.winton at gmail.com>
wrote:

> Hi folks, Orrin WN1Z here in northeast Calif... just received my wspr
> board from tapr.
>
> It looks like the heat sink on the RPi cpu is blocking insertion of the
> wspr board. I could peel off that heatsink, or i could get another Pi to
> dedicate to wspr.
>
> Or is there an extension available -- like stilts -- that will allow the
> wspr board to stand above the heatsink? If so, does anyone have a part
> number to search for, or even the correct name for the "stilts"?
>
> Also does the wspr board seat all the way to the left on the 40-pin header.
>
> Thanks for comments. This is going to be a blast. Recently got back into
> psk-31 and jt65, with indoor mag loops only, and am seeing results on
> pskreporter.info... looks like wsprnet.org is the one for reporting wspr?
>
> 73 de wn1z
>
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/hfsig_lists.tapr.org/attachments/20160421/2744e709/attachment.html>