<div dir="ltr">Hawaii has several Kantronics KPC 3 full-time APRS stations.<div>One on Oahu rarely iGates (and intermittently, at that), but always digipeats.</div><div>Another is "rock solid" in iGating and digipeating. A third is on Maui, about a mile above sea level, with a Wide3 digipeat. In that manner Hawaii Island, Maui, and Oahu can</div><div>exchange APRS data.</div><div><br></div><div>We'd like to "fill in" coverage on Oahu, given all our valleys, and modest mountains.</div><div><br></div><div>The questions - what is the default algorithm about what gets iGated? Does a station only get iGated if there are no hops in the APRS packet, for example?</div><div><br></div><div>Our "fill in" stations may not be able to have internet access, so it may be two hops just to get to an iGate.</div><div><br></div><div>I've been through the KPC 3 and 3+ manual online, but see no overt mention of configuring iGating and hop counts.</div><div><br></div><div>Any information welcomed!</div><div><br></div><div>Thank you!</div><div>73 de KH6CP</div><div><br></div><div><br></div></div>