<div dir="ltr"><div><div><div><div>I am trying to put together an APRS station in my vehicle. I have a Raspberry Pi 3 with a TNC Pi mounted with a 7" touch screen in a Smarti-Pi Touch case. I plan to run the latest Raspbian distro and Xastir software. I have a USB GPS receiver for the necessary location and timing data. I will be using a Kenwood TH-G71 on 144.390 for the radio.</div><div><br></div>Also in the vehicle, I will be installing an Icom IC-7100 ham transceiver and a Uniden BCT-15X scanner. Both the Icom and Uniden radios have serial GPS inputs for location data.<br><br></div>I'm thinking there must be some way to get a serial output from the RPi to feed the other radios. I do not have the other radios in hand yet, so I am not sure of the exact interfacing required, only that is is serial data. I am assuming at this time it is simply a data stream input from the GPS receiver, so the two inputs may likely be a basic parallel connection.<br><br></div>Comments, suggestion, and ideas appreciated.<br><br>73,<br></div>Michael WA7SKG<br><br></div>