<div dir="ltr"><div>Tom KD7LXL: generally you have the FM phone side of the radio selected with the [Band Sel] button (a press of the volume knobs).  So when you push the TUNE soft button, it tunes the FM phone side of the radio.  You simply need to press the [BAND SEL] button (volume knob) to make the data side of the radio the "active" side to QSY to a local digi working on another frequency.</div><div><br></div>The TM-D710G also has a menu item: <APRS LOCK>.  when configured to [FREQUENCY], you can't change the frequency of the data band side of the radio when the TNC is activated.  I presume you'll need to set this to [OFF] for the QSY function to change the frequency on the data side.  I leave mine in the [OFF] setting anyways, as I have three different channels that I use for APRS, with three different tones for Voice Alert.  (CSQ, 100.0, and a local PL)  <div><br></div><div><br></div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr">







<p><span>--... ...--<br></span><span style="font-size:12.8px">Bob Mueller<br></span><span style="font-size:12.8px">K8MD<br></span><a href="mailto:bob@funautical.com" style="font-size:12.8px" target="_blank">bob@funautical.com</a></p></div></div></div></div></div>
<br><div class="gmail_quote">On Thu, Jan 26, 2017 at 11:30 AM, Robert Bruninga <span dir="ltr"><<a href="mailto:bruninga@usna.edu" target="_blank">bruninga@usna.edu</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">> How can the frequency objects be used for the data side of the radio...<br>
> Such as when the object announces a local UHF APRS channel?<br>
<br>
On the Kenwood while displaying the desired object:<br>
<br>
1) Press band select button (volume control)<br>
2) Press TUNE (assuming the data band is in VFO)<br>
<br>
Note, if the UHF APRS frequency object also is a shift to 9600 baud, then<br>
this will require an entirely new TNC setting and can only be done in  a<br>
PM....?<br>
<br>
But again, the possible factor of two improvement by doing APRS data at 9600<br>
baud is not worth this additional hassle maybe.<br>
<br>
Bob, WB4APR<br>
<br>
--<br>
<br>
> So put an local Object beacon on 144.39 DIRECT at the UHF sites<br>
> indicating the local UHF frequency using the "frequency format".  Then<br>
> ONE BUTTON on the Kenwoods and Yaesu's will instantly QSY for the local<br>
> UHF channel.<br>
<br>
Is there a way to get it to QSY on the "data" band (where the TNC is<br>
configured)? As far as I can tell, the QSY function always targets the<br>
non-data band, which is opposite of what you want to advertise an APRS<br>
channel like you describe.<br>
<br>
Tom KD7LXL<br>
______________________________<wbr>_________________<br>
aprssig mailing list<br>
<a href="mailto:aprssig@tapr.org">aprssig@tapr.org</a><br>
<a href="http://www.tapr.org/mailman/listinfo/aprssig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/aprssig</a><br>
______________________________<wbr>_________________<br>
aprssig mailing list<br>
<a href="mailto:aprssig@tapr.org">aprssig@tapr.org</a><br>
<a href="http://www.tapr.org/mailman/listinfo/aprssig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/<wbr>listinfo/aprssig</a><br>
</blockquote></div><br></div>