<div dir="ltr">Ebay user buyhitek lists CDM1250s with the 403-470MHz split (which he incorrectly lists as 403-512MHz) in lots of 1, 5, and 100: <a href="http://www.ebay.com/itm/301670665474">http://www.ebay.com/itm/301670665474</a><div><br></div><div>To answer Erv's question, I've never used them at 9600, but the Moto 16pin does give you direct discriminator and modulator access, so I'd be shocked if they didn't work well for it.</div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature">--<br>Kenneth Finnegan<br><a href="http://blog.thelifeofkenneth.com/" target="_blank">http://blog.thelifeofkenneth.com/</a></div></div>
<br><div class="gmail_quote">On Wed, Jun 1, 2016 at 2:23 PM, Robert Bruninga via aprssig <span dir="ltr"><<a href="mailto:aprssig@tapr.org" target="_blank">aprssig@tapr.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div lang="EN-US" link="blue" vlink="purple"><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I guess because it would take a lot of work fussing with Ebay for days on end trying to scrape up a bunch of identical radios.  Or are you saying that they can be found in 20 unit quantities at that price?  If so, that’s not a bad approach.</span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">But I do want the 9600 baud backbone to begin with identical units to minimize the unknowns in getting it up and running.</span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Bob, WB4aPR</span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> Kenneth Finnegan [mailto:<a href="mailto:kennethfinnegan2007@gmail.com" target="_blank">kennethfinnegan2007@gmail.com</a>] <br><b>Sent:</b> Wednesday, June 01, 2016 5:04 PM<br><b>To:</b> Robert Bruninga; TAPR APRS Mailing List<br><b>Subject:</b> Re: [aprssig] E Coast 9600 baud backbone 15W radios (firmware?).</span></p><div><div class="h5"><p class="MsoNormal"> </p><div><p class="MsoNormal">I'm still a bit unclear; why are you trying to homebrew data radios with out-of-band PAs when you can get 25W UHF CDM1250s on eBay for less than $100 a piece? I've been converting all my packet stations over to CDM750/CDM1250s; the standard Motorola 16 pin IO connector is fantastic for packet.</p></div><div><p class="MsoNormal"><br clear="all"></p><div><div><p class="MsoNormal">--<br>Kenneth Finnegan<br><a href="http://blog.thelifeofkenneth.com/" target="_blank">http://blog.thelifeofkenneth.com/</a></p></div></div><p class="MsoNormal"> </p><div><p class="MsoNormal">On Wed, Jun 1, 2016 at 9:40 AM, Robert Bruninga via aprssig <<a href="mailto:aprssig@tapr.org" target="_blank">aprssig@tapr.org</a>> wrote:</p><blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-right:0in"><div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">By the way, I may have found a possible UHF exciter to get the radios working on 420 MHz, but the question is, is using the KA Packet nodes in the Kantronics KPC-9612’s the only way to do the level 4 network?  Although I am sure we can find enough KPC9612’s for the 15 sites, I’m wondering about long term viability?</span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Is there software out there to replicate the KA-NODE network (I think it is same as THENET or theoriginal NETROM nodes?  Othern than the nice off-the-shelf approach of the KPC9612’s?</span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Bob,WB4APR</span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p><p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> Robert Bruninga [mailto:<a href="mailto:bruninga@usna.edu" target="_blank">bruninga@usna.edu</a>] <br><b>Sent:</b> Friday, May 27, 2016 11:31 AM<br><b>To:</b> TAPR APRS Mailing List<br><b>Cc:</b> Robert Bruninga<br><b>Subject:</b> E Coast 9600 baud backbone 15W radios.</span></p><p class="MsoNormal"> </p><div><div><div><div><div><p class="MsoNormal" style="margin-bottom:12.0pt">At Dayton I picked up a box of 25 UHF data radios for the E Coast 9600 baud backbone project.</p></div><p class="MsoNormal" style="margin-bottom:12.0pt">Turns out, they are on 824 MHz.  But they have a 15 W driver stage that can give us 15 Watts in the 420 MHz amateur band if we can find a simple UHF transceiver with 1 Watt output.  ALl we have to do is bypass the final 45W PA and add a TR switch.</p></div><p class="MsoNormal" style="margin-bottom:12.0pt">Then add a TNC node and we are done.</p></div><p class="MsoNormal" style="margin-bottom:12.0pt">See the info on these radios at the bottom of this page:<br><a href="http://aprs.org/ec9600net.html" target="_blank">http://aprs.org/ec9600net.html</a></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt">So, does anyone have ideas for the 1W UHX XCVR that we can split out the TX and RX separately so we can use these PA's?</p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt">The data radios include a GPS receiver, but we wont need thoes in this application.</p></div><p class="MsoNormal">Bob, WB4APR</p></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>_______________________________________________<br>aprssig mailing list<br><a href="mailto:aprssig@tapr.org" target="_blank">aprssig@tapr.org</a><br><a href="http://www.tapr.org/mailman/listinfo/aprssig" target="_blank">http://www.tapr.org/mailman/listinfo/aprssig</a></p></blockquote></div><p class="MsoNormal"> </p></div></div></div></div></div>
<br>_______________________________________________<br>
aprssig mailing list<br>
<a href="mailto:aprssig@tapr.org">aprssig@tapr.org</a><br>
<a href="http://www.tapr.org/mailman/listinfo/aprssig" rel="noreferrer" target="_blank">http://www.tapr.org/mailman/listinfo/aprssig</a><br>
<br></blockquote></div><br></div></div>