<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Arial">One semi-kit left</font><br>
<br>
On 4/4/2011 2:17 PM, Jason Rausch wrote:
<blockquote
cite="mid:481013.90550.qm@web1116.biz.mail.sk1.yahoo.com"
type="cite">
<table border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr>
<td style="font: inherit;" valign="top">Just to add on to
Rich's post:<br>
<br>
These PCB's are from the "mini-kit" era. They are 100%
compatible with the latest KISS firmware. If the
PIC18F252's shown have never been upgraded, they will need
to be flashed with the latest firmware either via the
bootloader or can be fresh flashed with a PIC programmer.
Anyone who purchases one, if you need the PIC to be
flashed, I will gladly re-flash it for free with the
latest firmware. Just cover the round-trip shipping.<br>
<br>
The entire HamHUD platform is still valid and the kit is
not hard to build. There are a few mistakes on this board
that the builder should be aware of, but by no means
should scare anyone away from building one:<br>
<br>
1. The LCD backlight lines are swapped (as Rich
mentioned). There should be a small section of wire wrap
wire taped to the PCB, for the builder to make this fix.<br>
<br>
2. The LCD mounting holes are not aligned correctly. Two
are just about on and the others are a few mm's off. You
can actually still use them by angling the mounting
screws.<br>
<br>
Being a 10+ year HamHUD user, I still think it's one of
the best mobile display options available. The project is
not dead and we still have a very large user group at:<br>
<br>
<a class="moz-txt-link-freetext" href="http://groups.yahoo.com/group/hamhud">http://groups.yahoo.com/group/hamhud</a><br>
<br>
Having said all of that $30 is a hell of a deal to get a
HamHUD started! Not much more is needed to get one built
up and running. With the KISS firmware, that means
everything from a KPC-3, AEA, Tracker2, TinyTrak4 or even
an OpenTracker 1+ flashed with KISS firmware will work as
a packet modem. Plenty of cheap options!<br>
<br>
Jason Rausch - KE4NYV<br>
RPC Electronics, LLC<br>
<a class="moz-txt-link-abbreviated" href="http://www.rpc-electronics.com">www.rpc-electronics.com</a><br>
<br>
--- On <b>Mon, 4/4/11, Rich Osman <i><a class="moz-txt-link-rfc2396E" href="mailto:lists@n1oz.net"><lists@n1oz.net></a></i></b>
wrote:<br>
<blockquote style="border-left: 2px solid rgb(16, 16,
255); margin-left: 5px; padding-left: 5px;"><br>
From: Rich Osman <a class="moz-txt-link-rfc2396E" href="mailto:lists@n1oz.net"><lists@n1oz.net></a><br>
Subject: [aprssig] FS: HH2 Semi-kit $30 ea<br>
To: <a class="moz-txt-link-abbreviated" href="mailto:aprssig@tapr.org">aprssig@tapr.org</a><br>
Date: Monday, April 4, 2011, 1:13 PM<br>
<br>
<div id="yiv760491490"> Yeah, I know. Largely
historical interest. I have three of these. Includes
the hard to find stuff;<br>
<br>
Printed Circuit Board<br>
Preprogrammed PIC 18F252 (not sure of Rev, but it's
fairly late - uses 10 Mhz crystal)<br>
10 Mhz crystal<br>
FRAM<br>
rotary encoder<br>
4 X 20 LCD<br>
piezo beeper<br>
5W 20V Zener<br>
Sort of the 39 ohm 2W resistor - I used 2 X 18 ohm 2W
in series and epoxied them to the chassis. <br>
<br>
These are early rev boards that need to be manually
jumpered<br>
<br>
Picture of what you get here:<br>
<br>
<a moz-do-not-send="true" rel="nofollow"
class="yiv760491490moz-txt-link-freetext"
target="_blank"
href="http://www.n1oz.net/GottaGo/HH2.JPG">http://www.n1oz.net/GottaGo/HH2.JPG</a><br>
<br>
docs and latest firmware at <br>
<br>
<a moz-do-not-send="true" rel="nofollow"
class="yiv760491490moz-txt-link-freetext"
target="_blank"
href="http://www.hamhud.net/hh2/index.html">http://www.hamhud.net/hh2/index.html</a><br>
<br>
If you've not built one of these before, i suggest you
<b><i>not </i></b>start now. <br>
<br>
Pickup in DFW or $5 shipping in flatrate box within
the US. International shipping at actual postage.
Payment by Paypal or certified funds. <br>
<pre class="yiv760491490moz-signature">--
<a moz-do-not-send="true" rel="nofollow" class="yiv760491490moz-txt-link-freetext" ymailto="mailto:lists@n1oz.net" target="_blank" href="/mc/compose?to=lists@n1oz.net">mailto:lists@n1oz.net</a> <a moz-do-not-send="true" rel="nofollow" class="yiv760491490moz-txt-link-freetext" target="_blank" href="http://www.n1oz.net">http://www.n1oz.net</a> ARS: N1OZ
Rich Osman; POB 93167; Southlake, TX 76092 (Near DFW Airport)
</pre>
</div>
<br>
-----Inline Attachment Follows-----<br>
<br>
<div class="plainMail">_______________________________________________<br>
aprssig mailing list<br>
<a moz-do-not-send="true"
ymailto="mailto:aprssig@tapr.org"
href="/mc/compose?to=aprssig@tapr.org">aprssig@tapr.org</a><br>
<a moz-do-not-send="true"
href="https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig"
target="_blank">https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig</a><br>
</div>
</blockquote>
</td>
</tr>
</tbody>
</table>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
aprssig mailing list
<a class="moz-txt-link-abbreviated" href="mailto:aprssig@tapr.org">aprssig@tapr.org</a>
<a class="moz-txt-link-freetext" href="https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig">https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
<a class="moz-txt-link-freetext" href="mailto:lists@n1oz.net">mailto:lists@n1oz.net</a> <a class="moz-txt-link-freetext" href="http://www.n1oz.net">http://www.n1oz.net</a> ARS: N1OZ
Rich Osman; POB 93167; Southlake, TX 76092 (Near DFW Airport)
</pre>
</body>
</html>