<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Yeah, I know. Largely historical interest. I have three of these.
Includes the hard to find stuff;<br>
<br>
Printed Circuit Board<br>
Preprogrammed PIC 18F252 (not sure of Rev, but it's fairly late -
uses 10 Mhz crystal)<br>
10 Mhz crystal<br>
FRAM<br>
rotary encoder<br>
4 X 20 LCD<br>
piezo beeper<br>
5W 20V Zener<br>
Sort of the 39 ohm 2W resistor - I used 2 X 18 ohm 2W in series and
epoxied them to the chassis. <br>
<br>
These are early rev boards that need to be manually jumpered<br>
<br>
Picture of what you get here:<br>
<br>
<a class="moz-txt-link-freetext" href="http://www.n1oz.net/GottaGo/HH2.JPG">http://www.n1oz.net/GottaGo/HH2.JPG</a><br>
<br>
docs and latest firmware at <br>
<br>
<a class="moz-txt-link-freetext" href="http://www.hamhud.net/hh2/index.html">http://www.hamhud.net/hh2/index.html</a><br>
<br>
If you've not built one of these before, i suggest you <b><i>not </i></b>start
now. <br>
<br>
Pickup in DFW or $5 shipping in flatrate box within the US.
International shipping at actual postage. Payment by Paypal or
certified funds. <br>
<pre class="moz-signature" cols="72">--
<a class="moz-txt-link-freetext" href="mailto:lists@n1oz.net">mailto:lists@n1oz.net</a> <a class="moz-txt-link-freetext" href="http://www.n1oz.net">http://www.n1oz.net</a> ARS: N1OZ
Rich Osman; POB 93167; Southlake, TX 76092 (Near DFW Airport)
</pre>
</body>
</html>