<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:v = "urn:schemas-microsoft-com:vml" xmlns:o =
"urn:schemas-microsoft-com:office:office" xmlns:w =
"urn:schemas-microsoft-com:office:word" xmlns:m =
"http://schemas.microsoft.com/office/2004/12/omml"><HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.7600.16625">
<STYLE>
<!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page Section1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
-->
</STYLE>
</HEAD>
<BODY style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px"
id=MailContainerBody lang=EN-US leftMargin=0 link=blue topMargin=0 vLink=purple
CanvasTabStop="true" name="Compose message area">
<DIV>To unsubscribe from this service you must first purchase a
Craft-O-Matic<BR>Adjustable Subscription Cancellation Unit. The unit can be
obtained<BR>from most hardware stores and dental clinics. Be sure to obtain
the<BR>proper permits to operate the unit from the Nuclear
Regulatory<BR>Commission and the Food and Drug Administration in Washington D.C.
USA.<BR><BR>Be sure to carefully unpack the kit and place each component in
its<BR>accompanying mesh safety bag. Mount the Pershing DF4 mesinator on
top<BR>of the perforated Gerring Mach 77 refibulator and attach them using
the<BR>eight-millimetre torque fork. Be sure that the refibulator is
mounted<BR>at a 66 degree angle and properly dispersed so that it is flush with
the<BR>curved section of the Pyrex thistle tube. Place the four sections
of<BR>the triangular separation gear into the posture cylinder and lock
them<BR>into place using the band aid adhesive strip. Insert the wiggling
pin<BR>into the wobbling hole, making sure that it seated correctly. Place
the<BR>D cell battery and the eleven 9 volt batteries in the power
chamber.<BR><BR>The device should be calibrated before operation using the
optional<BR>digital corkscrew accessory pack prior to operation. Insert the
digital<BR>corkscrew through the electronic combustion service chamber
using<BR>caution not to touch the reinforced tungsten igniter control module
and<BR>quickly turn the inverter drive to 28.6 degrees. Turn the
Craft-O-Matic<BR>Adjustable Subscription Cancellation Unit upside down and hit
the bottom<BR>plate with a 48-ounce ball-peen hammer while shaking the
unit<BR>vigorously. Force open the door to the incineration valve
compartment<BR>and set the pressure gauge to 719 psi. Close the door and seal it
shut<BR>with duct tape. The unit should now be properly calibrated and ready
to<BR>use.<BR><BR>Before activating the Craft-O-Matic Adjustable Subscription
Cancellation<BR>Unit, you must first elevate it to a height of 229 feet above
sea level<BR>to insure that the unit receives the proper oxygen level and
barometric<BR>pressure. Point the aerial to 17 degrees north by Northeast to
within<BR>the parameters of the Telstar GS-2 weather satellite and apply
pressure<BR>to the wing shaft on the southern most section of the
modular<BR>accelerator. Using the special ratchet adapter supplied with the
unit,<BR>rotate the heater core to the "on" position.<BR><BR>The "on" position
has been obtained when the green light begins to<BR>flash, signifying that the
red light is about to go off. Once the red<BR>light is off, flip the toggle
switch labeled "ON/OFF" to the "ON"<BR>position and count to 47 before logging
on to the system.<BR><BR>Logon using your username and password and wait for the
prompt. Once<BR>prompted you must check the box with the appropriate action you
wish to<BR>take and then press the pressure release button and turn off
the<BR>compressor while turning the hand crank at 231 meters per minute.
Next,<BR>press control, alt, delete, caps lock, shift, number lock, escape
and<BR>tab simultaneously.<BR><BR>Press enter.<BR><BR>You will have one second
to complete the procedure. If you fail to<BR>respond in the time limit allowed,
simply purchase a new Craft-O-Matic<BR>Adjustable Subscription Cancellation Unit
and start from the beginning.<BR><BR>Please remember that this is the only way
we will accept for you to<BR>unsubscribe from this service. We have made every
attempt to simplify<BR>the procedure for your convenience. Failure to comply
with the<BR>unsubscribe policy will result in immediate termination of
your<BR>subscription so please follow the above directions closely.</DIV><FONT
face=Calibri>
<DIV><BR>James<BR><A
title="mailto:KB7TBT@arrl.net
CTRL + Click to follow link"
href="mailto:KB7TBT@arrl.net">KB7TBT@arrl.net</A><BR>30M Digital #3727<BR>HELL
#2925<BR>EM84km<BR><A
title="http://www.kb7tbt.com
CTRL + Click to follow link"
href="http://www.kb7tbt.com">www.kb7tbt.com</A></DIV>
<DIV> </DIV>
<DIV><BR></FONT> </DIV>
<DIV style="FONT: 10pt Tahoma">
<DIV><FONT size=3 face=Calibri></FONT> </DIV></DIV>
<DIV><BR></DIV>
<DIV class=Section1>
<P class=MsoNormal> Please unsubscribe .RJHoward ve3doh
<o:p></o:p></P></DIV>
<P><FONT face=Calibri></FONT></P></BODY></HTML>