<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Lynn W. Deffenbaugh (Mr) wrote:
<blockquote cite="mid:4BB4EE89.3060104@homeside.to" type="cite">Greetings,
<br>
<br>
I'm working on more advanced capabilities for my APRSISCE/32 APRS
client software and am wondering what the proper approach is for gating
(or is it digipeating?) HF traffic onto local VHF frequencies? Is this
an ok thing to do, or just gate the received packets to APRS-IS and be
done with it?
<br>
<br>
If I do cross-band them, do they go out over VHF with just used
callsign insertion into the path as a digipeat or does it go back out
as a third-party packet?
<br>
<br>
Are there any good (read: current) guidance on paths for HF APRS?
<br>
</blockquote>
HF propagation is constantly changing and erratic. You normally will
only have a reliable path between any two specific locations (like two
stations trying to converse with each other) for a few hours a day. On
the other hand, the band is open to SOMEWHERE hundreds or throusands of
miles away virually 24/7. Digipeating on HF (i.e. between HF stations)
is severely discouraged since WHERE you would be digipeated to is
completely unpredictable. <br>
<br>
Because of the erratic nature of digipeating on bands where propagation
is constantly changing, the success rate to reach a given station is
very low. In an interactive messaging scenario, you wind up with
endless missed acks and re-transmissions that will reduce the
already-low 300 baud throughput of the shared channel even more. You
can easily have 8-10 transmissions to get a single message string from
station A to station B on HF. [Bear in mind that when you transmit on
HF, you are potentially occupying the channel over HALF OF NORTH
AMERICA at once!]<br>
<br>
The KAM TNCs treat the crossband digipeat as a normal digi hop
triggered by the name "GATE" in the path. A typical HF path would be
something like:<br>
<br>
WA8LMF > APRS,GATE,WIDE2-1 <br>
<br>
<br>
This would use NO digis on HF, cross over to VHF at various random and
unknown locations over an area of potentially 2000 miles radius or more
(depending on propagation) and then do a normal one-hop home station
VHF path in each of those locations. <br>
<br>
<br>
The real question, though, is: Will the locals in these various remote
VHF areas appreciate having random "DX" stations from hundreds (or
thousands) of miles away suddenly appearing on their local 2-meter
channel???<br>
<br>
Given that HF is far more suited to one-way beaconing from remote
locations to random fixed station igates (rather than interactive
two-way communications between specific users; i.e. messaging) ,
probably just gating HF receive into the Internet would be more useful
than retransmitting HF posits onto VHF. This causes HF fixed
stations anywhere to become part of an enormous diversity receiving
system, ensuring that mobile posits from anywhere will always hit the
APRS-IS regardless of propagation or band conditions. (Since you don't
care WHAT station injected you into the Internet system; only that you
got to the Internet.)<br>
<br>
<br>
See my discussion on HF APRS at: <br>
<br>
<a class="moz-txt-link-rfc2396E" href="http://wa8lmf.net/aprs/HF_APRS_Notes.htm"><http://wa8lmf.net/aprs/HF_APRS_Notes.htm></a> <br>
<br>
<br>
for more details on HF operations. <br>
<br>
<hr size="2" width="100%"><br>
--<br>
<br>
Stephen H. Smith wa8lmf (at) aol.com <br>
EchoLink Node: WA8LMF or 14400 [Think bottom of the 2M band]<br>
Skype: WA8LMF<br>
Home Page: <a class="moz-txt-link-freetext" href="http://wa8lmf.net">http://wa8lmf.net</a><br>
<br>
NEW! Universal HF/VHF/UHF Antenna Mounting System<br>
<a class="moz-txt-link-freetext" href="http://wa8lmf.net/mobile/UniversalAntMountSystem.htm">http://wa8lmf.net/mobile/UniversalAntMountSystem.htm</a><br>
<br>
"APRS 101" Explanation of APRS Path Selection & Digipeating <br>
<a class="moz-txt-link-freetext" href="http://wa8lmf.net/DigiPaths">http://wa8lmf.net/DigiPaths</a> <br>
<br>
Updated "Rev H" APRS <a class="moz-txt-link-freetext" href="http://wa8lmf.net/aprs">http://wa8lmf.net/aprs</a><br>
Symbols Set for UI-View, <br>
UIpoint and APRSplus:<br>
<br>
<br>
</body>
</html>