<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Hi Guys</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The UK Amateur Radio license no longer allows the
operation of an APRS digipeater without special permission (Notice of
Variation) from the regulator (Ofcom). It being filtered first through the
RSGB.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I wish to run a digipeater on 10.151MHz (KAM) but
am advised the it would probably not be recommended by the RSGB because the
bandwidth of 300bd would exceed the 500Hz laid down in the IARU bandplan for
30m. The implication being that we should not operate APRS on 30m at
all.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Monitoring signals on 30m I find that they all seem
to be within 400Hz but I will need to prove that on paper.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Can anyone please tell me what the bandwidth will
be for a properly adjusted 300bd station and how this might be
calculated?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>73</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jim, G0JXN</FONT></DIV></FONT></DIV></BODY></HTML>