<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.6000.16587" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT size=2>
<P>I think I read the manual wrong.</P>
<P>The 9600 baud menu option is for TX.</P>
<P>But what has me confused now, is setting this to 1200, does it do what my
icom 706 does, and affect the rx 9600 pin ?</P>
<P>I think what I have to do is </P>
<P>1. Set the 9600 baud option to "OFF" in the menu (this is only for TX)</P>
<P>2. Then 9k6 and 1k2 data will be available as normal from the 9k6 and 1k2
pins on the data sockets.</P>
<P>This would allow me to tx and rx 1200 baud on VHF (ISS), and rx only 9600
baud on the go32 and ao51.</P></FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>----------------------------------------------------------------------------</FONT></DIV>
<DIV><FONT face=Arial size=2>Andrew Rich VK4TEC</FONT></DIV>
<DIV><FONT face=Arial size=2><A
href="mailto:vk4tec@people.net.au">vk4tec@people.net.au</A></FONT></DIV>
<DIV><FONT face=Arial size=2><A
href="http://www.tech-software.net/">http://www.tech-software.net</A></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE>
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B> Jack Chomley
[mailto:radio@irock.com.au]<BR><B>Sent:</B> Friday, 4 January 2008 9:48
AM<BR><B>To:</B> vk4tec@people.net.au; TAPR APRS Mailing
List<BR><B>Subject:</B> Re: [aprssig] ICOM 910 <BR><BR></FONT></DIV>At 08:49
AM 1/4/2008, Andrew wrote:<BR>
<BLOCKQUOTE class=cite cite="" type="cite"><FONT size=2>Need some
advice.<BR></FONT> <BR><FONT size=2>Can I do this with the ICOM 910
?<BR></FONT> <BR><FONT size=2>1. Run ISS independantly on VFOA with a
1200 baud TNC. (and TX)<BR>2. Run GO-32 / AO-51 on the sub band (RX only)
9k6 - WITH an AG-35 preamp in line ?<BR></FONT> <BR><FONT size=2>From
what I am reading, the AG-35 or AG-25 for that matter, are powered up the
coax ??<BR></FONT> <BR><FONT size=2>I have a KPC9612 TNC with seperate
1200 9k6 ports.<BR></FONT> <BR><FONT size=2>That should work out
nicely<BR></FONT> <BR><FONT
size=2>----------------------------------------------------------------------------<BR>Andrew
Rich VK4TEC<BR><A
href="mailto:vk4tec@people.net.au">vk4tec@people.net.au</A><BR><A
href="http://www.tech-software.net/"
eudora="autourl">http://www.tech-software.net</A><BR></FONT> </BLOCKQUOTE><BR>Andrew,
I have a Hamtronics CC432-5 down converter kit 435-437MHz in with 28-30MHz
out.<BR><BR><A href="http://www.hamtronics.com/rcv_conv.htm"
eudora="autourl">http://www.hamtronics.com/rcv_conv.htm</A><BR><BR>Along with
a Down East Microwave 450LNW 70cm pre amp kit (NOT powered up coax) Its not a
current model.<BR><BR><A href="http://www.downeastmicrowave.com/"
eudora="autourl">http://www.downeastmicrowave.com/</A><BR><BR>You can have
them for free, IF you want them. I got all SAT Mode keen about 15 years ago
and made a heap of stuff.....these kits are the
feftovers!<BR><BR>73s<BR><BR>Jack VK4JRC<BR><BR><BR></BLOCKQUOTE></BODY></HTML>