<div>Can anyone check out the mic-e (ie PTT transmit method) on the 710.  The d700 radio when used as a mic-e (burst upon unkeying) sometimes delayed up to 2 seconds from when I unkeyed before re-keying the radio and transmitting.  It was usually about 1 in 5 to 1 in 7 times when I unkeyed that it would/will do this.  And when it did this,It was long enough of a delay that the repeater I was talking on would play the courtesy beep and the other guy would start talking only to be covered up by my radio finally getting around to sending the position report.  I _suspect_ this to be caused by the way the radio gets gps data... sets the LT buffer to GPRMC then to GPGGA, so it takes two iterations of gps data to get a position with altitude and speed.  I think that the radio could be in the middle of collecting GPS data when I unkey and that's the reason for the delay.  
</div>
<div> </div>
<div>Has this been fixed in the 710?</div>
<div> </div>
<div>I'm glad to see that the 710 allows us to lock the data port (mini-din) to one 1/2 of the radio and doesn't follow the mic select.  Does it allow for PTT sensing as well?  What I mean by this is if I hook an external TNC to the data jack, does the PTT line on the data jack follow the actual PTT of the radio?  Does it give me a chance to allow the external TNC to see if the tnc in the radio says it's on PTT?
<br clear="all">Wes<br>-- <br>In theory there is no difference between practice and theory. </div>