<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2722" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><STRONG><FONT size=2>Robbie wrote:</FONT></STRONG></DIV>
<DIV>> The display will have a BCON displayed just left of the flashing
GPS<BR>> (indicating valid NMEA input)<BR>><BR><STRONG><FONT size=2>Yes it
is displayed.</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG> </DIV>
<DIV>Herb, KB7UVC wrote:</DIV>
<DIV>1. What are you using for a transmitting path? Hopefully
WIDE1-1,WIDE2-1<BR></DIV>
<DIV><STRONG><FONT size=2>It is currently set to Wide2-2. I must confess I DO
NOT understand what value it should be set to.</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG><STRONG><FONT
size=2></FONT></STRONG> </DIV>
<DIV>2. Another problem that has bagged me a few times is that if your squelch
is<BR>turned too low and the radio is wide open, then it will not
transmit! </DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG><STRONG><FONT
size=2></FONT></STRONG> </DIV>
<DIV><STRONG><FONT size=2>I believe it is set properly, but I will double
check.</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG> </DIV>
<DIV>...DOUG KD4MOJ wrote:</DIV>
<DIV>And really all you need is the ground and TX from the GPS is you don't want
all those waypoints flooding back to your GPS. I had that problem with the
Garmins... getting<BR>the data FROM the D700 populating my waypoints in the
GPS.<BR></DIV>
<DIV><STRONG><FONT size=2>I did not realize that this could happen. Should I
disconnect the TO GPS (DATA OUT) wire?</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG><BR></DIV>
<DIV><FONT size=2>Someone wrote</FONT></DIV>
<DIV>>> with AprsPoint and the D700 setup conversation. I had hoped to
have my<BR>>> Hopefully I'll have the help page ready tonight (with
setup<BR>>> graphics) and point the folks to it.<BR></DIV>
<DIV><STRONG><FONT size=2>Waiting to here about this.</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG> </DIV>
<DIV><STRONG><FONT size=2>I want to thanks all of you who have taken the time to
educate me on how to set up my D700. I have learned alot of useful things and
you all have removed some of the 'mystery' for me. </FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG> </DIV>
<DIV><STRONG><FONT size=2>Vic</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG><STRONG><FONT
size=2></FONT></STRONG><BR><STRONG><FONT
size=2>________________________________________________________</FONT></STRONG></DIV>
<DIV> </DIV>
<DIV><STRONG><FONT size=2>Victor Fraenckel - The
Windman <BR>victorf ATSIGN
windreader DOT
com<BR>KC2GUI
</FONT></STRONG></DIV>
<DIV><STRONG><FONT size=2></FONT></STRONG> </DIV></BODY></HTML>