<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<a class="moz-txt-link-abbreviated" href="mailto:vk4tec@tech-software.net">vk4tec@tech-software.net</a> wrote:
<blockquote cite="midBAELLOGMPBOBMDHKGBFPEEMDCDAA.vk4tec@tech-software.net" type="cite">
<pre wrap="">What on earth is the PTT pin on the D700 ?
I am using the PS2 connector
1) TXD
2) GND
3)
4) 9600
5) 1200
6) SQC
_______________________________________________
aprssig mailing list
<a class="moz-txt-link-abbreviated" href="mailto:aprssig@lists.tapr.org">aprssig@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig">https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig</a>
</pre>
</blockquote>
<font face="Arial">Pin 3 which Kenwood confusingly labels "Standby".
It's just a normal ground-to-key PTT line. <br>
<br>
Note that on the D700 the connections on this jack follow the
"selected" band for the mic. I.E. if the mic is keying the left side
of the radio, the mini-DIN6 lines are also connected to the left. If
the mic is keying the right side of the radio, the mini-DIN6 is also
connected to the right. <br>
<br>
<br>
Full details on the miniDIN6 "PS/2" packet or data connector, including
an enlarged diagram useful as a wiring worksheet, are in this file on
my website:<br>
<br>
<a class="moz-txt-link-freetext" href="http://webs.lanset.com">http://webs.lanset.com</a> /wa8lmf/miscinfo <br>
<br>
Look for the file MiniDIN6-Packet.pdf <br>
<br>
<br>
<br>
<br>
Stephen H. Smith wa8lmf (at) aol.com <br>
EchoLink Node: 14400 [Think bottom of the 2M band]<br>
Home Page: <a class="moz-txt-link-freetext" href="http://wa8lmf.com">http://wa8lmf.com</a><br>
<br>
"APRS 101" Explanation of APRS Path Selection & Digipeating <br>
<a class="moz-txt-link-freetext" href="http://webs.lanset.com/wa8lmf/DigiPaths">http://webs.lanset.com/wa8lmf/DigiPaths</a> <br>
<br>
Updated APRS Symbol Chart <br>
<a class="moz-txt-link-freetext" href="http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf">http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf</a> <br>
<br>
New/Updated "Rev G" APRS <a class="moz-txt-link-freetext" href="http://webs.lanset.com/wa8lmf/aprs">http://webs.lanset.com/wa8lmf/aprs</a><br>
Symbols Set for UI-View, <br>
UIpoint and APRSplus:<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
</font>
</body>
</html>