<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<a class="moz-txt-link-abbreviated" href="mailto:n2zrc@earthlink.net">n2zrc@earthlink.net</a> wrote:
<blockquote cite="mid4308C038.20700@earthlink.net" type="cite">
<pre wrap="">Hi All,
My home APRS station hears and can be heard pretty well ... but there are
existing DIGIs in the area that sufficiently cover much of it. Still, there
are, of course, areas that they simply, because of terrain and buildings, don't
have coverage from any of them. In the ancient practice of acting as a fill-in
digi, I've had my KPC-3 Plus v8.2 acting as RELAY. It is now, however, in KISS
mode using the last version of UI-View. In light of the "New WideN-N Paradigm"
I want to comply with current recommendations, yet see the need for continuing
to act as a fill-in digi.
I can always set the TNC to some mode other than KISS if necessary, but I
would prefer keeping it there (UI-View seems to "hear" better that way). What
are the current recommended settings from within UI-View ... or can this only
be done from within the TNC since UI-View is no longer under development? 73
_______________________________________________
aprssig mailing list
<a class="moz-txt-link-abbreviated" href="mailto:aprssig@lists.tapr.org">aprssig@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig">https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig</a>
</pre>
</blockquote>
<font face="Arial">In UI-View, pull down Setup, Digipeater Setup and
place "WIDE1-1" (the New Paradigm home station replacement for
"RELAY") into the "Alias(es)" field and check "Enable Digi". <br>
<br>
<br>
There are much more elaborate things you can do by editing .INI files
but these are the basic settings. Note that the UIview internal
digipeater won't be available at all unless you are in KISS mode. In
the KISS mode, UIview handles all the digipeating functions; the
outdated ver 8.2 firmware in the KPC3+ isn't even an issue since it
isn't used. <br>
<br>
<br>
<br>
Stephen H. Smith wa8lmf (at) aol.com <br>
EchoLink Node: 14400 [Think bottom of the 2M band]<br>
Home Page: <a class="moz-txt-link-freetext" href="http://wa8lmf.com">http://wa8lmf.com</a><br>
<br>
"APRS 101" Explanation of APRS Path Selection & Digipeating <br>
<a class="moz-txt-link-freetext" href="http://webs.lanset.com/wa8lmf/DigiPaths">http://webs.lanset.com/wa8lmf/DigiPaths</a> <br>
<br>
Updated APRS Symbol Chart <br>
<a class="moz-txt-link-freetext" href="http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf">http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf</a> <br>
<br>
New/Updated "Rev G" APRS <a class="moz-txt-link-freetext" href="http://webs.lanset.com/wa8lmf/aprs">http://webs.lanset.com/wa8lmf/aprs</a><br>
Symbols Set for UI-View, <br>
UIpoint and APRSplus:<br>
<br>
<br>
<br>
<br>
</font>
</body>
</html>