<html>
<body>
<font size=3>At 08:11 AM 6/18/2005, I wrote:<br><br>
<blockquote type=cite class=cite cite="">
It's been a while since I ran WinAPRS, but I have a file in my WinAPRS
folder called "memory.txt" and it contains the
following:<br><br>
STATIONS 16382<br>
MESSAGES 16382<br>
PKTBUFFER 2000192<br>
DESTROYICONS YES<br><br>
I'm not really sure these are
valid settings, but you might give them a try.</blockquote><br>
<x-tab> </x-tab>I was able
to find the following in the WinAPRS documentation: <br><br>
</font><h3><b>memory.txt or config.txt</b></h3><font size=3>Either file
name can be used. It will look for config.txt first, then look for
memory.txt. Only one will be read. Since users need to be able to
configure the amount of memory being allocated for station lists etc,
before the program is launched and even if they are not registered, a
separate config file is set up for this purpose. It is <b>memory.txt</b>.
It must be located in the same directory as the WinAPRS.exe application.
It can contain the following commands. Use a single TAB to separate the
command and the argument.
<ul>
<li>STATIONS n - this tells it how many stations to allocate
<li>MESSAGES n - this tells it how many messages to allocate
<li>PKTBUFFER n - how much memory to allocate for the packet buffer (8192
minimum)
<li>DESTROYICONS YES/NO - this is for WinAPRS ONLY and is to help debug
memory problems.
<li>Version 2.4.0 and 2.4.1 did not destroy icons, version 2.4.2 did.
This will allow users to change the setting so that we can figure out
what works and what does not.
</ul>If the memory.txt file is not present, it will default to the normal
station counts that it did in version 2.4.2. <br><br>
<x-tab> </x-tab>7 3<br>
<x-tab> </x-tab>Earl<br><br>
</font></body>
<br>
<div>Earl Needham, KD5XB, Clovis, New Mexico DM84jk</div>
<div><a href="http://kd5xb-2.no-ip.info/" EUDORA=AUTOURL>http://kd5xb-2.no-ip.info</a></div>
</html>