<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
It is on page 40 of the D700 manual. I don't have the radio but I did
get this from the pdf manual.<br>
<br>
Channel Display<br>
When in this mode, the transceiver displays only memory channel numbers
(and memory names if stored) instead of frequencies.<br>
<br>
1 - Press MNU to enter Menu mode.<br>
2 - Press [up arrow]/[down arrow] to select "RADIO (1-)", then press
[OK]<br>
3 - Press [up arrow]/[down arrow] to select "MEMORY (1-4-)", then press
[OK]<br>
4 - Press [up arrow]/[down arrow] to select "CHANNEL DISPLAY (1-4-2)",
then press [OK]<br>
5 - Press [up arrow]/[down arrow] to switch the function ON (or OFF)<br>
6 - Press [OK] to complete the setting.<br>
7 - Press MNU to exit Menu mode.<br>
<i><br>
Note: You cannot switch this function ON unless you can recall any
channel on both bands A and B.<br>
</i>When in Channel Display mode, you cannot use the following
functions:<br>
<br>
Sub-band Select, VFO Select, VFO Scan, Memory Store, PM Store, PM
Recall, Memory-to-VFO Transfer, Partial/ Full/ PM Reset, Frequency Step
Size Change, 1/ 10 MHz Step Change, All-control Lock<br>
<br>
73's<br>
<br>
John<br>
KD5YOU<br>
<br>
Ron wrote:<br>
<blockquote type="cite"
cite="mid001101c51303$83a73450$6401a8c0@mdgbuft3qa24od">I searched my
D700 manual and can't find how to show the channel labels without the
freq. I do it on my D7 all the time but can't seem to get the D700 to
work. Any one got an idea? Tnx.
<br>
WA2WWK Ron <br>
<br>
<br>
_______________________________________________
<br>
aprssig mailing list
<br>
<a class="moz-txt-link-abbreviated" href="mailto:aprssig@lists.tapr.org">aprssig@lists.tapr.org</a>
<br>
<a class="moz-txt-link-freetext" href="https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig">https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig</a>
<br>
<br>
<br>
</blockquote>
</body>
</html>