<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
Also wouldn't using crossband repeat clip the first half second or so
of the packet due to the transmit delay? I don't have a D700 to test
with, but my TH-79A will slightly desense when in crossband repeat. <br>
<br>
Robert Bruninga wrote:<br>
<blockquote type="cite" cite="mids1e8077a.055@FSGWHUB.usna.edu">
<blockquote type="cite">
<pre wrap="">Would it be possible to set up the D700 to crossband repeat
thus bypassing theneed to set up the D700 for aprs digipeating?
</pre>
</blockquote>
<pre wrap=""><!---->
Impossible. The audio distortion makes the sounds
undecodable by any TNC...
At 11:47 AM 1/14/2005 -0700, you wrote:
</pre>
<blockquote type="cite">
<pre wrap="">I have agreed to demonstrate some APRS software at a ham fest. I
</pre>
</blockquote>
<pre wrap=""><!---->will
</pre>
<blockquote type="cite">
<pre wrap="">however be inside a building. I will be using a Laptop and TH-D7A.
</pre>
</blockquote>
<pre wrap=""><!---->I
</pre>
<blockquote type="cite">
<pre wrap="">thought I could configure the TM-D700A in my truck in the parking lot
</pre>
</blockquote>
<pre wrap=""><!---->to
</pre>
<blockquote type="cite">
<pre wrap="">digipeat so I could receive some signals inside. To test it I set the
</pre>
</blockquote>
<pre wrap=""><!---->UIDIGI
</pre>
<blockquote type="cite">
<pre wrap="">parameter in the D700 to relay and turned digipeat on. T set the path
</pre>
</blockquote>
<pre wrap=""><!---->in
</pre>
<blockquote type="cite">
<pre wrap="">the TH-D7 to relay, wide. The D700 digipeats the TH-7's signal and
</pre>
</blockquote>
<pre wrap=""><!---->it
</pre>
<blockquote type="cite">
<pre wrap="">shows up on Find-U. However the D700 will not digipeat any one
</pre>
</blockquote>
<pre wrap=""><!---->else's
</pre>
<blockquote type="cite">
<pre wrap="">signal so I can pick it up on the hand held and display it on the
</pre>
</blockquote>
<pre wrap=""><!---->computer.
</pre>
<blockquote type="cite">
<pre wrap="">I imagine this is because I am not directly receiving anyone who has
</pre>
</blockquote>
<pre wrap=""><!---->relay
</pre>
<blockquote type="cite">
<pre wrap="">in their path. Is there a way that I could set the D700 to digipeat
</pre>
</blockquote>
<pre wrap=""><!---->some of
</pre>
<blockquote type="cite">
<pre wrap="">the relay or wide stations in the area (Loveland Colorado) so
</pre>
</blockquote>
<pre wrap=""><!---->something
</pre>
<blockquote type="cite">
<pre wrap="">besides the hand held and my truck will show up on the computer?. I
</pre>
</blockquote>
<pre wrap=""><!---->am
</pre>
<blockquote type="cite">
<pre wrap="">aware that this is going to add to the traffic, but it will be a
</pre>
</blockquote>
<pre wrap=""><!---->short
</pre>
<blockquote type="cite">
<pre wrap="">duration demo.
Thanks,
Ken W7TS
-------------------
Kenneth E. Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
-----------------------
E-mail: <a class="moz-txt-link-abbreviated" href="mailto:W7TS@comcast.net">W7TS@comcast.net</a>
------------------
_______________________________________________
aprssig mailing list
<a class="moz-txt-link-abbreviated" href="mailto:aprssig@lists.tapr.org">aprssig@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig">https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig</a>
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/2005
</pre>
</blockquote>
<pre wrap=""><!---->
Richard Holder
</pre>
</blockquote>
</body>
</html>