<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY style="COLOR: #000000; FONT-FAMILY: Times New Roman" bgColor=#ffffff>
<BLOCKQUOTE id=aea2e76c>
<DIV>To answer again about PL100, PL is set for a tone of 100 hz.</DIV>
<DIV> </DIV>
<DIV>Chris</DIV>
<DIV>KB8UIH</DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=kb8uih@sbcglobal.net href="mailto:kb8uih@sbcglobal.net">Chris
Rose</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=aprssig@lists.tapr.org
href="mailto:aprssig@lists.tapr.org">TAPR APRS Mailing List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, July 18, 2004 12:39
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [aprssig] PL 100</DIV>
<DIV><BR></DIV>
<BLOCKQUOTE id=0><LABEL id=HbSession SessionId="2658660969"></LABEL>
<DIV>PL is encoding a tone or tone squelch or CTS or CTCSS on some
radios. Check your instruction manual for info on Tones or PLs and
it may clear up some confusion. When a PL is used on a repeater or
on simplex to close its/your squelch, a transmitter must transmit to you
the correct tone to open your squelch to allow you to listen to that
transmission. Same for you to open another hams/repeater's squelch
control if they have their receiver set for Tone Squelch mode.
You need to transmit a tone to open their receiver.</DIV>
<DIV> </DIV>
<DIV>Chris</DIV>
<DIV>KB8UIH</DIV></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE>
<P></P></BODY></HTML>