[aprssig] Consecutive Packet Send

[Robert Bruninga]

TX bursts are effective for conventional p acket, but not for APRS.

My APRS activity is mobile with the Kenwood radio front panel display.
If a digi was to dump the last 5 posits in one burst, all I would see  on the
front panel of the radio is the last one..

bOB, wb4apr
On Mon, Sep 20, 2021 at 12:43 PM Eric H. Christensen via aprssig
<aprssig at lists.tapr.org> wrote:
>
> Looking at the WX3in1 Plus 2.0 device, there is a field in the radio tab regarding transmitting packets.  The choices are 'separately' or 'in bursts'.  IIUC, if the device has multiple packets to transmit it can either transmit them separately with breaks in between, or can transmit all of the data packets all together with no breaks.  The manual that comes from Microsat says that 'separately' is the standard in APRS which got me thinking: if there is so much waste with the key up times, why not transmit in bursts to remove that waste?  What am I missing?
>
> 73,
> Eric WG3K
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org