[aprssig] [Kenwood_TH-D74] monitering aprs "Proximity/Voice Alert!"

Robert Bruninga bruninga at usna.edu
Mon May 20 15:08:17 EDT 2019


What I don’t like about the menu VA is that it then takes another
multi-press menu process to turn it off, even momentarily...

That is why I like the 4 APRS Frequency channel method.  TO change from
normal VA, to SILENT, to open-squelch monitoring, to PRIVATE, and to no VA
is just a twist 1 or 2 clicks with the tune knob to select one of the 4 APRS
channels saved with the different CTCSS/PL methods.

Since I discovered that, I never use the menu method.
Bob
-----Original Message-----
From: aprssig <aprssig-bounces at lists.tapr.org> On Behalf Of Steve Dimse
Sent: Monday, May 20, 2019 11:06 AM
To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
Subject: Re: [aprssig] [Kenwood_TH-D74] monitering aprs "Proximity/Voice
Alert!"

Bob also didn't mention that the D710 and D74 have an APRS menu option to
turn on voice alert which is easier than manually setting up CTCSS.

But it is pretty worthless in practice. I have hundreds of thousands of APRS
mobile miles with VA on, I do occasionally hear a station and I call if it
is safe (often it is in a city while towing my fifth wheel and talking isn't
safe), and have never once gotten an answer, nor have I gotten a call...

Steve K4HG

> On May 20, 2019, at 7:29 AM, Robert Bruninga <bruninga at usna.edu> wrote:
>
> I was astounded that of the 100 people in the APRS forum at Dayton only a
> handful knew what voice alert was about.
>
> Im going to start calling it PROXIMITY alert, because that is its real
> value.  To hear that someone is in range and after that, then make the
> call.  So it will be “APRS Proximity/Voice Alert”.
>
> Bob, WB4APR
> From: Robert Bruninga <bruninga at usna.edu>
> Sent: Sunday, May 19, 2019 7:50 AM
> To: Kenwood_TH-D74 at yahoogroups.com; TAPR APRS Mailing List
> <aprssig at lists.tapr.org>
> Cc: Robert Bruninga <bruninga at usna.edu>
> Subject: Re: [Kenwood_TH-D74] monitering aprs
>
> THe way to do APRS in any radio is to have Four memory channels and ALWAYS
> keep the volume UP.:
>
> 1) (normal) 144.39 with CTCSS 100 for Voice Alert (and in-range
> detection)
> 2) (check) 144.39 without CT so you can check the  channel by ear
> 3) (Silent)  144.39 with CTCSS (private tone for only your friends to
> call, otherwise totally silent)
> 4) (Event) 144.39 +600 for Events where there is a 144.99 input/144.39
> output digi
>
> Bob, WB4APR
>
>
> On Sat, May 18, 2019 at 11:49 PM Cliff Sojourner cls at employees.org
> [Kenwood_TH-D74] <Kenwood_TH-D74 at yahoogroups.com> wrote:
>>
>> Sorry, I should have written more specific:
>>
>> PL on voice on 144.390, not on the APRS signal.
>>
>> Cliff K6CLS CM87uw
>>
>> On May 18, 2019 7:29:00 PM PDT, "Don Rhodes lbdwag at gmail.com
>> [Kenwood_TH-D74]" <Kenwood_TH-D74 at yahoogroups.com> wrote:
>>>
>>> Putting a PL tone on it and that APRS still decodes is fascinating to
>>> me. I will be doing that so I do not need to keep the volume on 0.
>>>
>>>
>>> --
>>> Don
>>> "Planning to plan."
>>> Arthur C. Clarke: "Any sufficiently advanced technology is
>>> indistinguishable from magic."
>>> Matthew Green: "Sufficiently advanced incompetence is indistinguishable
>>> from malice."
>>>
>>>
>>> On Wed, May 15, 2019 at 3:19 PM Cliff Sojourner cls at employees.org
>>> [Kenwood_TH-D74] <Kenwood_TH-D74 at yahoogroups.com> wrote:
>>>>
>>>> Bob B recommend we use pl100 on the APRS side, to squelch the modem
>>>> tones, yet have a well known voice channel. Makes sense to me. But I've
>>>> never heard anyone on .390. Is such use common anywhere in the country
>>>> (world)?
>>>>
>>>> Cliff K6CLS CM87uw
>>>>
>>>> On May 15, 2019 7:43:06 AM PDT, "'Aaron (kc1cxx) Addison'
>>>> rangerfriday at gmail.com [Kenwood_TH-D74]"
>>>> <Kenwood_TH-D74 at yahoogroups.com> wrote:
>>>>>
>>>>> Also you can put a tone squelch in on recieve aprs will still decode
>>>>> but you wont hear anything unless they by some odd chance someone has
>>>>> the same one in on transmit.
>>>>>
>>>>> A
>>>>>
>>>>> On Wed, May 15, 2019, 10:14 AM rlmartin58 at yahoo.com [Kenwood_TH-D74]
>>>>> <Kenwood_TH-D74 at yahoogroups.com> wrote:
>>>>>>
>>>>>> is there anyway i can turn the volume down on the aprs B Band so
>>>>>> i can moniter the A band while I am recieving aprs
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>> __._,_.___
>> Posted by: Cliff Sojourner <cls at employees.org> Reply via web post
>>
>>>>
>> Reply to sender
>>
>>>>
>> Reply to group
>>
>>>>
>> Start a New Topic
>>
>>>>
>> Messages in this topic (16)
>>
>> <image001.jpg>
>> Have you tried the highest rated email app?
>> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email
>> app on the market. What are you waiting for? Now you can access all your
>> inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an
>> email again with 1000GB of free cloud storage.
>> VISIT YOUR GROUP
>> <image002.jpg>
>> • Privacy • Unsubscribe • Terms of Use
>>
>> SPONSORED LINKS
>> <image003.jpg>
>> <image003.jpg>
>> <image003.jpg>
>> .
>> <image003.jpg>
>> <image003.jpg>
>> __,_._,___
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org



More information about the aprssig mailing list