[aprssig] FTM-100DR APRS path for ISS?

[Randy Love]

It's easy to tell that APRS and packet operation in the Yaesu radios was
added as a nicety. Kenwood still keeps their APRS capable radios fully
functional fortunately.

73,
Randy
WF5X

On Thu, Jun 1, 2017 at 11:37 AM, Bob Burns W9BU <w9bu_lists at rlburns.net>
wrote:

> Appears to be true.
>
> See page 41 of the FTM-100DR APRS manual. Your choices for digipeater
> route are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those three
> selections, the route is not configurable.
>
> Bob...
>
>
>
> On 5/25/2017 10:02 AM, Robert Bruninga wrote:
>
>>
>> Is it true that the FTM-100DR does not allow any other path than WIDE1-1
>> and/or WIDE2-1?
>>
>> Bob, WB4APR
>>
>> ---------- Forwarded message ----------
>> Subject: APRS Routing
>>
>> I have a Yaesu FTM-100DR with GPS and built-in TNC (etc.). The APRS setup
>> allows only Wide-1 and Wide-2 (and "Off") routing, with no alteration
>> available.   I guess it's called the New Paradigm. The manual even says
>> (settings cannot be changed)..
>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20170601/7fe06687/attachment.html>