[aprssig] APRS WX for CRYC

[Dan Srebnick]

Use the Davis IP module.  Plug it into your network and it will send
the weather to Davis, who in turn will send it to APRS-IS.  You don't
need an always up client program to do this.
On Thu, 2017-12-07 at 14:08 -0500, Joe Della Barba wrote:
>     How hard is it to connect to APRS?
> 
>     73
> 
>     Joe N3HGB
> 
>     
> 
>     
> 
>     On 12/07/2017 01:31 PM, Rick Bogdan
>       wrote:
> 
>     
> 
>     
> >       
> >       Joe, have you looked at the Davis Vue?
> >       https://www.davisnet.com/solution/vantage-vue/
> >       It replaced a Ambient Weather station that was up for over 14
> >         years. It was solar powered like the Davis Vue. The weather
> >         station is located approx. 1,000 feet from the our house on
> > the
> >         roof of shed.  There isn't any problem receiving the signal
> > in
> >         the house on two consoles.
> > 
> >       
> >       -- 
> > 
> >         Rick ka1udx 
> >       
> > 
> >       
> >       
> > 
> >       _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/listinfo/aprssig
> > 
> >     
> 
>     
> 
>   
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20171209/75887c0b/attachment.html>